Compare

Split Solid Block - Aggregate concrete blocks

Name: Split Solid Block - Aggregate concrete blocks
Brand: iv8pDMdhuwhYtBKE181Bx4
SKU: dQBGFHxQ3jJ7efhp9JJDBU

Colinwell Split Face Concrete Masonry Blocks have a rugged textured finish, to give the appearance of natural worked stone.

Jump to:

Application

Suitable for use in the construction of external and internal loadbearing and non-loadbearing walls, including the inner and outer leaves of cavity walls, party walls, partition walls and boundary walls.
Can also be used as reinforced masonry walls through incorporation of bed joint reinforcement.

Masonry block with a split face finish. Manufactured from cement, graded aggregates, an integral waterproofer and pigment.

Features and benefits:

Versatile.
Suitable for environments where robust, durable finishes are required.
Good weathering characteristics.
Complements other building finishes, including traditional facing bricks, curtain walling and rainscreen cladding.
Water and frost-resistant, helping to retain a fresh, clean appearance.
Manufactured in accordance with BS EN 771-3 and BS 5628-1.
Cured by steam to give the blocks efflorescence-free performance characteristics.
Minimal maintenance required.
Non-combustible and will not contribute to the spread of flame.
Blocks are efflorescence free.
Available in a variety of colours.

Color	Grey Available in a variety of colours. Red Cream Green Gold Yellow White Show more
Finish	Rough Rugged textured finish.
Material	Concrete
Shape	Rectangular With sharp arises.
Size	440 x 100 x 225 mm L x W x H.

Uniclass 2015	Pr_20_93_52_01 Aggregate concrete blocksPrimary
CAWS	F10/18 Concrete facing blockwork F10/255 Concrete facing blockwork

Product range	Blocks

Standard	To BS EN 771-3 and BS 5628-1.
Block description	Split solid, rugged texture finish, graded aggregate, precast concrete masonry blocks.
Compressive strength	-
Mean value	15 N/mm².
Freeze/ thaw resistance Water and frost-resistant, helping to retain a fresh, clean appearance.	-
Thermal conductivity	1.25 W/m·K.
Work sizes (length x width x height)	440 x 100 x 225 mm.
Accessory and special shape types Non-standard components and specials may be cut from standard units or, depending on quantity, manufactured to individual requirements. Consult manufacturer and insert requirements.	Not required. Bond-beam blocks. Cavity closers. Cills. Half blocks. Lintels. Quoins. Squints.
Tolerance category	D2.
Reaction to fire Non-combustible and will not contribute to the spread of flame.	-

Colour	Abbey blend. Bracken. Buff. Cinder blend. Cream. Green. Honey. Natural. Oatmeal. Red. Sandstone. Slate blend. Straw. Whinstone. White. Yorkstone blend. Show more
Mortar type Refer to manufacturer recommended mortar in colour specification guidance.	Manufacturer standard. Maroon U53. Beige E74. Cream G89. Green N70. Tan C30. White J88. Orange T36. Yellow D10. Black L62. Show more
Mortar mix	See manufacturer's literature and insert requirements.
Joint	See manufacturer's literature and insert requirements.
Spacing	6–10 m. Spacing between control joint interval.
Material/ Finish	Concrete, rugged texture.
Efflorescence	None.
Average density	2100 kg/m³.
Shrinkage	<0.04% (drying). To BS EN 772.4.
Water absorption	3–6%.
Bond strength	0.15 N/mm² (in shear). To BS EN 998.2, Annexure C.
Moisture movement	0.15 mm/m (maximum).