NBS Source
List your products
SPG Patent Glazing System

The SPG System single or double glazed patent glazing is suitable for vertical or sloping applications, including extended rooflights and canopies. It is a traditional patent glazing system with the structural stalk on the outside of the building. Extruded saddle brackets and snap-on beads have no external fixings.

The system provides a weathertight roof down to a pitch of 15°. It is compatible with SAS windows, SAS shopfronts/ entrances and SAS curtain wall for a total facade service.

Design, installation and glazing service is available through a nationwide network of installers.

Composition and manufacture:

  • Aluminium alloy: 6063, T6 to BS 1474: 1987.
  • Insulation materials: Rigid PVC.
  • Gasketry: PVC Nytrile to BS 3734 and BS 7412 Cat A.


  • Maximum bar spacing: 1200 mm.
  • Maximum height: To suit conditions.

General information
Uniclass 2015
Pr_20_76_51_05 Aluminium patent glazing barsPrimary

H10/115 Patent glazing

H10/10 Patent glazing

Specification data - Aluminium patent glazing bars
Product Reference

SPG Patent Glazing System

Glazing bar -

Extruded aluminium


Anodized, colour ___

Mill aluminium

Polyester powder coated, colour ___

Minimum film thickness

Not applicable

Mill finish.

___ micrometres


___ mm

Bottom overhang/ lap

___ mm

Pane/ infilling materials

Insulating glass units, ___ mm thick

Single glazed panes, ___ mm thick

Standard product features


Traditional bar, two edge supported.

Product Options

Finish/ Colour:

Mill finish is from stock. Anodized and polyester powder coated finishes are available to order. Consult with Senior Architectural Systems for colour range.

Minimum film thickness:

Consult with Senior Architectural Systems following choice of finish.

Pane/ Infilling materials:

Senior Patent Glazing systems are designed to accommodate various glazing options from 6 mm to 34 mm overall thickness.

Similar products from Senior Architectural Systems Ltd