SpeedStile FP - Normally Open BA

Size:

- FP:

• Casework length 1448 mm (normally closed), 1932 mm (normally open).

• Casework height: 950 mm.

• Casework width: 300 mm.

• Clear walkway: 550 mm.

- FPW:

• Casework length 1448 mm (normally closed), 1932 mm (normally open).

• Casework height: 950 mm.

• Casework width: 480 mm.

• Clear walkway: 900 mm.

Material:

• Lid and end leg: 1.4301/ 304 grade grained stainless steel.

• Wing housing: Painted steel finished to match top and front.

• Plinth: 1.4301/ 304 grade grained stainless steel.

• Wings: 12 mm toughened glass.

• Inner side panels: Cobalt grey 8.5 mm 3 ply laminate safety glass.

• Outer side panels: 1.4301/ 304 grade grained stainless steel.

Configuration:

Insert drawing/ schedule reference number where appropriate. The following speed gate types are available:

• SpeedStile FP Left Hand Cabinet.

• SpeedStile FP Right Hand Cabinet.

• SpeedStile FP Centre Cabinet.

• Speed Stile FPW Left Hand Cabinet.

• Speed Stile FPW Right Hand Cabinet.

• Speed Stile FPW Centre Cabinet.

• Speed Stile FPW Centre Left Combi Cabinet.

• Speed Stile FPW Centre Right Combi Cabinet.

In order to create a lane, it is necessary to order at least one left and one right cabinet. To create more than one lane, use one or more central cabinets (or combi cabinets) together with one left and one right cabinet. Combi cabinets are available to create one or more wide passageways within a standard width combination. Where you have more than one lane the specification must be accompanied by a drawing indicating the layout of the cabinets and the quantity and type of accessory fitted to them.

Power failure:

In the event of a power failure the wings will drive open and remain open until the power is restored.

Power supply required:

230 V AC 50/ 60 Hz.

Accessories:

- Cut outs and provision for proximity reader under glass:

The size of the cut out will be dependent upon which reader has been specified (the reader will generally be part of the access control package). Check with Gunnebo UK Ltd Sales Executives for advice on the size and location of the cut out and reader suitability.

- Visitor card capture system:

The card capture unit is mounted within the cabinet and has a slot facility integrated within the exit side of the lid. Generally only one unit is required per area. The unit works in conjunction with a card reader to check the validity of the visitor's request to leave and either rejects the card or grants egress and retains their card. The cabinet contains a drop box facility which will allow cards to drop within it. Access to the drop box is easily made via a lockable end leg. The card reader and the card capture unit will generally be part of the access control package.

- Lift screen integration:

A semi-recessed housing is provided within the lid of the cabinet to accommodate a screen at the correct viewing angle. The screen itself will be supplied and installed by others. Gunnebo recommend that the lift call screens be as small as possible to ensure their suitability. Note - Gunnebo are unable to advise if the integration of the lift call screens is possible without knowing what screen is being proposed.

- LED way mode indicator on the end leg:

80 x 65 mm display showing either a green arrow or a red cross. They give a clear indication to users approaching the lanes which lanes are for entry/exit and which lanes are closed. This is particularly useful where the operational mode of the speed gate is altered to match pedestrian flow conditions.

- Emergency break glass unit mounted on the end leg:

Allows egress in an emergency.

- Remote push button console:

Single or double push button mounted in a 200 x 120 x 75 mm stainless steel enclosure with timber ends.

- Remote control unit for multiple lane control:

MP Touch is a full colour touch screen control unit consisting of panel switches which can change the operational mode of the entrance control products connected to it. It can control up to a maximum of 30 gates or lanes.

- Battery counter:

Eight digit LCD counter, six year battery life either re-settable or no reset. For bidirectional counting, two counters will be required (one per each transit direction).