Verified by manufacturer 4 months ago
SpeedStile BP BA, 550 mm standard passage(s)
Speedgate motorized bi-parting wings, classic design, stainless steel series, short cabinet.
Motorized sliding Bi-parting speed gate for internal installation. Available in a variety of finishes and ergonomic shapes, whilst also providing high performance and security.
Passage in one or both directions is electronically controlled. On receiving a signal from the access control system, or remote control, the wings open (normally closed [NC]). If an unauthorized person tries to tailgate or attempts to enter from the opposite direction, the in-built alarm system is activated. If within the pre-set timeout no passage has occurred, the lane will close and reset.
LED way-mode indicators are flush-mounted within the end leg, with illuminated symbols. LED red-green indicators (horizontal and vertical) are integrated into the walkway.
Features and benefits:
Color | Other |
Finish | Brushed |
Material | Steel Guidance for specification option: 304 grade stainless steel. Polyurethane Glass |
Length | 1448 mm 1932 mm |
Width | Bespoke Manufacturer guidanceOverall width will vary based on clear opening size(s) and configuration specified. |
Height | 950 mm |
Warranty description | Two year |
Uniclass | |
CAWS | L20/490 Automatic doors L20/60 Doors |
Properties | |
Safety features | Manufacturer's standard.Guidance for specification option:
|
Configuration | Standard short lane, single.Guidance for specification option: Requires one left and one right cabinet.
Standard long lane, single.Guidance for specification option: Requires one left and one right cabinet.
Standard short lane, multiple.Guidance for specification option: Insert details or drawing reference/ schedule etc. Requires one left and one right cabinet plus one or more centre cabinets per section.
Standard long lane, multiple.Guidance for specification option: Insert details or drawing reference/ schedule etc. Requires one left and one right cabinet plus one or more centre cabinets per section.
Manufacturer guidancePassage width: 550 mm per lane. Cabinet width, each: 300 mm. |
Housing | |
Type | SpeedStile BP BA. |
Material and finish | Manufacturer's standard.Guidance for specification option:
|
Colour | Acrylic and stainless steel.Guidance for specification option: Standard. PMMA and stainless steel.8.5 mm three-ply laminate safety glass.Full stainless steel.Manufacturer guidanceSide panels only - Lid and end legs inlay colours specified separately below. |
Panel | |
Type | Bi-parting wings speed gate. |
Rotation | Bi-parting glass panel wings (motorized sliding).Guidance for specification option: Speed gate. |
Speed of opening | Manufacturer's standard. |
Material and finish | 15 mm-thick acrylic. |
Colour | Clear. |
Size | |
Clear opening width (minimum) | 550 mm. |
Overall width | As Configuration. |
Length | As Configuration. |
Height | 950 mm.Guidance for specification option: Overall height. |
Security | Fraud detection algorithm.Guidance for specification option: Prevention of: Intrusion; tailgating; piggybacking; wrong way direction; leave aisle timeout. |
Credential Reader | |
Type | Card reader integration, insertion type.Guidance for specification option: 20 passages per minute. Card reader integration, swipe type.Guidance for specification option: 30 passages per minute. Card reader integration, proximity type.Guidance for specification option: 40 passages per minute. |
Controls | Remote. |
Number of transactions (minimum) | Manufacturer's standard.Guidance for specification option: See Credential Reader type guidance for details. |
Control unit | Manufacturer's standard.Guidance for specification option: Control board location: In master Speedstile cabinet. Cabling and conduit: Through the ground. |
Power supply | 230 V a.c.Guidance for specification option: Standard. 50 Hz. 345 VA in operation, 10 VA standby. 115 V a.c.Guidance for specification option: On request. 60 Hz. |
Communications | RS485 serial interface.COMR1 switching interface. |
Accessories | None.LED way mode indicator.Pictogram.Battery back-up.Digital LCD counter.Emergency break glass push button.Lift screen integrations. |
Lid and end legs inlay | Painted polyurethane, metallic grey. Guidance for specification option: Standard. Painted polyurethane, colour. Guidance for specification option: Insert requirements. |
Operating temperature | 5—40°C. Guidance for specification option: 95% no condensing relative humidity. |
Ingress protection (IP) rating | IP20. |
Noise | <55 dB. |
MeanTimeBetweenFailure | Four million cycles. |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 2 | |
- | 2 |