Sopro® SG 602 Primer-Sealer
Application

Suitable for use on interior walls and floors.

Suitable substrates include:

  • Cement render, lime/ cement render, gypsum plaster, homogeneous, flush-jointed masonry (no composite masonry), concrete, aerated concrete, paperless gypsum panels, gypsum plasterboard and gypsum fibreboard, cement screeds, calcium sulphate screeds.
  • Ceramic tiles and natural stone.

Only use on timber substrates that are insensitive to moisture. Do not use on substrates exposed to risk of rising damp.

Substrates should be dry, strong, crack-free, dimensionally stable and free from adhesion-impairing sub-stances (e.g. dust, oil, wax, release agent, efflorescence, laitance, paint, lacquer and varnish residue).

Stir or shake prior to use and apply by paint brush, block brush or roller. Apply material moderately to avoid puddling and skinning. Work may resume immediately after priming coat has fully dried through. Sopro SG 602 should be left to dry for no longer than 24 hours.

Available in 5 kg, 10 kg and 20 kg canisters.

Description

One component synthetic resin primer for high and variable suction substrates. Suitable for the application of mineral adhesives, surface fillers and waterproof membranes.

Features and benefits:

  • Solvent-free.
  • Suitable for floor heating systems.
  • Overcoatable after 2–5 hours.
  • Acts as a barrier coat against adhesive/ mortar moisture.
  • Suitable for calcium sulphate screeds and self-levelling calcium sulphate screeds.

Dilutable 1:1 with water on cementitious and calcium sulphate-based substrates. Apply in undiluted form to non-absorbent substrates.

Applications:

Suitable for use on interior walls and floors.

Suitable substrates include:

  • Cement render, lime/ cement render, gypsum plaster, homogeneous, flush-jointed masonry (no composite masonry), concrete, aerated concrete, paperless gypsum panels, gypsum plasterboard and gypsum fibreboard, cement screeds, calcium sulphate screeds.
  • Ceramic tiles and natural stone.

Only use on timber substrates that are insensitive to moisture. Do not use on substrates exposed to risk of rising damp.

Substrates should be dry, strong, crack-free, dimensionally stable and free from adhesion-impairing sub-stances (e.g. dust, oil, wax, release agent, efflorescence, laitance, paint, lacquer and varnish residue).

Stir or shake prior to use and apply by paint brush, block brush or roller. Apply material moderately to avoid puddling and skinning. Work may resume immediately after priming coat has fully dried through. Sopro SG 602 should be left to dry for no longer than 24 hours.

Available in 5 kg, 10 kg and 20 kg canisters.

General information

Uniclass 2015

Pr_35_31_66_30 Floor covering primersPrimary

CAWS

M12/110 Resin flooring

Specification data - Floor covering primers

Product Reference

Sopro® SG 602 Primer-Sealer

Standard product features

Technical characteristics:

  • Application temperature: 5–35°C.
  • Coverage: 50–150 g/m² (dependent on substrate suction). Calcium-based sulphate substrates: 100–150 g/m².

Third party certifications
  • GISCODE: German hazardous substances classification - D1
  • EMICODE: EC1 Plus : Very-low-emission-plus
  • DGNB (German Sustainable Building Council): Top quality level 4, line 8
Similar products from SMET Building Products Ltd