NBS Source
List your products

Description

Icarus® Quickfix® is a unique, patented structural sun protection system, held in place simply and discreetly using clips. The Quickfix bracket consists of one clip attached to the supporting structure and one fork profile attached to the blade using stainless steel rivets. This two-part concept allows the blade to expand slightly when heated but avoids stresses occurring in the supporting structure. This system also allows for the creation of a continuous line of blades.

By mounting a fork part onto the blades, the blades can be easily clipped into supports mounted on the façade. The supports can be pre-mounted on mullions. With this system the blades can achieve a continuous visual line.

General information

Size

Insert requirement or 'As Drawing'.

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Material

Blades and SD type mullions: Aluminium extrusion profile in EN AW-6063 T66 alloy

End plates: Aluminium alloy (AlMg3)

Screws and fasteners: Stainless steel sheet-metal

Uniclass 2015

Pr_30_59_09_15 Carbon steel brise-soleil unitsPrimary

CAWS

L10/59 Solar shading system

L10/670 Brises soleil

Product range

Solar Shading / Icarus

Specification data - Carbon steel brise-soleil units

Product Reference

Solar Shading Elliptical Icarus® Horizontal Quickfix®

Size

Insert requirement or 'As Drawing'.

Type

Blades above

Blades below

Fixing

Knife brackets

Pre-mounted on façade.

RENSON® brackets

For direct fixing to façade.

Blades

-

Type

ICA.100

Aerofoil, 100 mm section width.

ICA.125

Aerofoil, 125 mm section width.

ICA.150

Aerofoil, 150 mm section width.

ICA.200

Aerofoil, 200 mm section width.

ICA.250

Aerofoil, 250 mm section width.

ICA.300

Aerofoil, 300 mm section width.

ICA.400

Aerofoil, 400 mm section width.

ICL.200

Aerofoil/ block, 200 mm section width.

Angle

45º

60º

75º

90º

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Standard product features

Material:

  • Blades and SD type mullions: Aluminium extrusion profile in EN AW-6063 T66 alloy.
  • End plates: Aluminium alloy (AlMg3).
  • Screws and fasteners: Stainless steel sheet-metal.

Product Options

Blades:

Indicative maximum spans in relation to horizontal overhang for typical wind pressures:

  • ICA.100 blade: 2.22 m (650 Pa), 2.06 m (800 Pa), 1.78 m (1250 Pa).
  • ICA.125 blade: 2.54 m (650 Pa), 2.36 m (800 Pa), 2.02 m (1250 Pa).
  • ICA.150 blade: 3.11 m (650 Pa), 2.9 m (800 Pa), 2.48 m (1250 Pa).
  • ICA.200 blade: 3.4 m (650 Pa), 3.15 m (800 Pa), 2.7 m (1250 Pa).
  • ICA.250 blade: 3.76 m (650 Pa), 3.58 m (800 Pa), 3.05 m (1250 Pa).
  • ICA.300 blade: 4.2 m (650 Pa), 4.1 m (800 Pa), 3.5 m (1250 Pa).
  • ICA.400 blade: 3.6 m (650 Pa), 3.6 m (800 Pa), 3.12 m (1250 Pa).
  • ICL.200 blade: 3.53 m (650 Pa), 3.27 m (800 Pa), 2.8 m (1250 Pa).

Finish:

Other anodized or polyester powder coating finishes may be available to special order.

Literature

Louvres

Louvres

Similar products from Renson Fabrications Ltd

Solar Shading Brise Soleil Sunclips® Horizontal Above

Solar Shading Brise Soleil Sunclips® Horizontal Below

Solar Shading Brise Soleil Sunclips® Horizontal Cassettes

Solar Shading Brise Soleil Sunclips® Horizontal Curved

Solar Shading Brise Soleil Sunclips® Vertical Cassettes

Solar Shading Brise Soleil Sunclips® Vertical on Mullions

Solar Shading Elliptical Icarus® Horizontal Cassettes

Solar Shading Elliptical Icarus® Horizontal Fixed

Solar Shading Elliptical Icarus® Horizontal Movable

Solar Shading Elliptical Icarus® Vertical Cassettes

© 2021 NBS Enterprises Ltd. All rights reserved.