Solar Shading Brise Soleil Sunclips® Horizontal Curved
Aluminium louvre solar shading.
Description
Permanent awning mounted on a curved wall where the blades are positioned continuously under the mullions. The design with curved blades is possible with blade type SC.096 and a minimum radius of 500 mm. Fascia profile SC.155 can also be curved. As an alternative design, the blades can be straight, with or without a curved SC.155 fascia profile. All Sunclips® blade types can be used with this facetted design, which can also be angled.
Features:
- Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications.
- Choice of mounting and angle.
- Choice of blade, angle, centres and finish.
- Blades can be matched to Sunclips vertical units and to Sunclips Patio vertical sliding units.
General information
Finish | Anodized 20 µ. Polyester powder coating, RAL Insert colour requirement, 60–80 µ. Polyester powder coating, Syntha Pulvin Insert colour requirement, 60–80 µ. |
Material | Aluminium extrusion profile in EN AW-6063 T66 alloy |
Size | Insert requirement or 'As Drawing'. |
Uniclass | |
CAWS | L10/59 Solar shading system L10/670 Brises-soleil |
Product range |
Specification data - Carbon steel brise-soleil units
Product Reference | Solar Shading Brise Soleil Sunclips® Horizontal Curved |
Size | Insert requirement or 'As Drawing'. |
Type | CurvedAvailable with SC.096 blades only. Facetted |
Fixing | Knife bracketsPre-mounted on façade. RENSON® bracketsFor direct fixing to façade. |
Support profiles | SD.014, horizontal framing or projecting arm40 x 14.5 mm (w x d). SD.054, horizontal framing or projecting arm40 x 54 mm (w x d). SD.100, horizontal framing or projecting arm40 x 100 mm (w x d). |
Blades | SC.096Blade width 96 mm. SE.096.01Blade width 96 mm. SE.096.02Perforated, blade width 96 mm. SE.130Blade width 130 mm. SE.176Blade width 176 mm. |
Profile | Not requiredSC.155For blades SC.096 or SE.096 with projecting arm SD.055. SE.176For blades SC.096 or SE.096 with projecting arm SD.054. SC.200For blades SC.096 or SE.096 with projecting arm SD.100; or blades SE.130 for projecting arm SD.054. |
Finish | Anodized20 µ. Polyester powder coating, RALInsert colour requirement, 60–80 µ. Polyester powder coating, Syntha PulvinInsert colour requirement, 60–80 µ. |
Accessories | NoneSD.054.98Plastic end cap for projecting arm SD.054. SD.054.99Aluminum end cap for projecting arm SD.054. SD.100.99Aluminium end cap for projecting arm SD.100. |
Standard product features | Material: Aluminium extrusion profile in EN AW-6063 T66 alloy. Blade inclination:
|
Product Options | Finish: Other anodized or polyester powder coating finishes may be available to special order. Intermediate mullion: An SD.014 intermediate mullion with standard clips may be needed, depending on the unsupported span of the blades and the local wind load. Accessories: Mullion end caps are for use when a fascia profile is not required. |
Literature
Louvres
Similar products from Renson Fabrications Ltd
Solar Shading Brise Soleil Sunclips® Horizontal Above
Solar Shading Brise Soleil Sunclips® Horizontal Below
Solar Shading Brise Soleil Sunclips® Horizontal Cassettes
Solar Shading Brise Soleil Sunclips® Vertical Cassettes
Solar Shading Brise Soleil Sunclips® Vertical on Mullions
Solar Shading Elliptical Icarus® Horizontal Cassettes
Solar Shading Elliptical Icarus® Horizontal Fixed
Solar Shading Elliptical Icarus® Horizontal Movable
Solar Shading Elliptical Icarus® Horizontal Quickfix®
Solar Shading Elliptical Icarus® Vertical Cassettes