NBS Source
I'm a manufacturer
Compare variants

Solar Shading Brise Soleil Sunclips® Horizontal Below

Verified by manufacturer 1 month ago

Sunclips® SE.096.01

Renson Fabrications Ltd Variant:

Aluminium louvre solar shading.

Jump to:
+44 (0)1622 754123 Website

Application

Solar shading applications.

Description

Permanent aluminium awning where the blades are positioned continuously under the mullions; can be horizontal or projecting at an angle.


Features and benefits:

  • Reduces solar heat gain.
  • Choice of mounting and angle.
  • Choice of blade.
  • Rapid assembly using clip system.
  • Continuous lines.

General information

Color

Silver

Grey

Other

Finish

Anodized

Powder-coated

Material

Aluminium

Shape

Rectangle

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Five year

Ten year

Manufacturer guidance

  • Five-year warranty on the gloss level of aluminium profiles.
  • Five-year product warranty on all defects arising from normal domestic use and provided regular maintenance has been carried out.
  • Five-year warranty on the electronic controls.
  • Ten-year warranty on all coatings on the aluminium profiles.

Uniclass

Pr_30_59_09_18 Composite brise-soleil unitsPrimary

CAWS

L10/59 Solar shading system

L10/670 Brises-soleil

Product range

Solar Shading / Sunclips

Specification data - Composite brise-soleil units

Support arms

-

Material

UV-resistant POM UPVC.

Colour

Black.

Grey.

Brace arms

-

Fixing

Knife brackets.

Guidance for specification option:

Pre-mounted on façade.

RENSON® brackets.

Guidance for specification option:

For direct fixing to façade.

Array louvre blades

-

Profile

Curved.

Size

96 x 20 mm.

Manufacturer guidance

Width x height.

Pitch

100 mm.

Material

Extruded aluminium alloy profile (EN AW-6063 T66).

Finish

Anodized.

Guidance for specification option:

Anodized (20 micron) F1.

Polyester powder coating, RAL.

Guidance for specification option:

60–80 micron; insert requirements.

Colour

As finish.

Front rail

-

Size

Guidance for specification option:

Consult manufacturer and insert requirements.

Material

Extruded aluminium alloy profile (EN AW-6063 T66).

Finish

Anodized.

Guidance for specification option:

Anodized (20 micron) F1.

Polyester powder coating, RAL.

Guidance for specification option:

60–80 micron; insert requirements.

Colour

As finish.

Mullion

SD.014.

SD.054.

SD.100.

Manufacturer guidance

  • Inclination possible, max. angle 30°.
  • Middle mullion SD.014 with standard clips is required depending on the free span and wind load.

Accessories

None.

End caps.

Guidance for specification option:

Insert requirements.

© 2024 NBS Enterprises Ltd. All rights reserved.