Solar Shading Brise Soleil Sunclips® Horizontal Below
Aluminium louvre solar shading.
Description
Permanent aluminium awning where the blades are positioned continuously under the mullions; can be horizontal or projecting at an angle.
Features:
- Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications.
- Choice of mounting and angle.
- Choice of blade, angle, centres and finish.
- Blades can be matched to Sunclips vertical units and to Sunclips Patio vertical sliding units.
General information
Size | Insert requirement or 'As Drawing'. |
Finish | Anodized 20 µ. Polyester powder coating, RAL Insert colour requirement, 60–80 µ. Polyester powder coating, Syntha Pulvin Insert colour requirement, 60–80 µ. |
Features | Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications Choice of mounting and angle Choice of blade, angle, centres and finish Blades can be matched to Sunclips vertical units and to Sunclips Patio vertical sliding units |
Material | Aluminium extrusion profile in EN AW-6063 T66 alloy |
Uniclass 2015 | |
CAWS | L10/59 Solar shading system L10/670 Brises soleil |
Specification data - Carbon steel brise-soleil units
Product Reference | Solar Shading Brise Soleil Sunclips® Horizontal Below |
Size | Insert requirement or 'As Drawing'. |
Fixing | Knife bracketsPre-mounted on façade. RENSON® bracketsFor direct fixing to façade. |
Support profiles | SD.014, horizontal framing or projecting arm40 x 14.5 mm (w x d). SD.054, horizontal framing or projecting arm40 x 54 mm (w x d). SD.100, horizontal framing or projecting arm40 x 100 mm (w x d). |
Blades | - |
Type | SC.096Blade width 96 mm. SE.096.01Blade width 96 mm. SE.096.02Perforated, blade width 96 mm. SE.130Blade width 130 mm. SE.176Blade width 176 mm. |
Angle (from horizontal) | 60ºStandard. Special order |
Fascia profile: | Not requiredSC.155For blades SC.096 or SE.096 with projecting arm SD.055. SE.176For blades SC.096 or SE.096 with projecting arm SD.054. SC.200For blades SC.096 or SE.096 with projecting arm SD.100; or blades SE.130 for projecting arm SD.054. |
Finish | Anodized20 µ. Polyester powder coating, RALInsert colour requirement, 60–80 µ. Polyester powder coating, Syntha PulvinInsert colour requirement, 60–80 µ. |
Accessories | NoneSD.054.98Plastic end cap for projecting arm SD.054. SD.054.99Aluminum end cap for projecting arm SD.054. SD.100.99Aluminium end cap for projecting arm SD.100. |
Standard product features | Material: Aluminium extrusion profile in EN AW-6063 T66 alloy. |
Product Options | Finish: Other anodized or polyester powder coating finishes may be available to special order. Intermediate mullion: An SD.014 intermediate mullion with standard clips may be needed, depending on the unsupported span of the blades and the local wind load. Accessories: Mullion end caps are for use when a fascia profile is not required. |
Literature
Similar products from Renson Fabrications Ltd
Solar Shading Brise Soleil Sunclips® Horizontal Above
Solar Shading Brise Soleil Sunclips® Horizontal Cassettes
Solar Shading Brise Soleil Sunclips® Horizontal Curved
Solar Shading Brise Soleil Sunclips® Vertical Cassettes
Solar Shading Brise Soleil Sunclips® Vertical on Mullions
Solar Shading Elliptical Icarus® Horizontal Cassettes
Solar Shading Elliptical Icarus® Horizontal Fixed
Solar Shading Elliptical Icarus® Horizontal Movable
Solar Shading Elliptical Icarus® Horizontal Quickfix®
Solar Shading Elliptical Icarus® Vertical Cassettes