Compare

SMET LiteFlo® Lightweight Flowing Screed

Name: SMET LiteFlo® Lightweight Flowing Screed
Brand: SMET Building Products Ltd
SKU: seUHoxFMWsmyZLVxRQLXRa

Verified by manufacturer 5 months ago

SMET Building Products Ltd

Third party certifications:

EPD
Certificate type
ISO 9001 Quality Management
Certificate type

A pumpable, superior-quality Alpha Hemihydrate screed, based on calcium sulphate and selected lightweight aggregates.

Jump to:

BOS

+44 (0)28 3026 6833 Website

Application

LiteFlo® is suitable for floors in homes, offices, public buildings, and places exposed to similar loads. LiteFlo® may be applied as a levelling screed directly onto a load-bearing floor, unbonded on a separating barrier (polyethene), as a floating floor and can be used in conjunction with underfloor heating or cavity floors. However, when using LiteFlo® in combination with underfloor heating, it should be noted that LiteFlo® has a low thermal conductivity.

LiteFlo® should be covered with a floor finish such as tiles, linoleum, parquet, cork, or carpet. If a cement-based adhesive or smoothing compound is required the surface of the screed must first be sealed, using an appropriate acrylic primer/sealer.

Description

A factory-produced, pumpable, high-quality screed material based on calcium sulphate. It’s supplied to site in pre-mixed 27kg bags or site silos. LiteFlo® is designed for application at thicknesses of between 20 and 70 mm, complies with EN 13813: 2002 and is CE marked.

Features and benefits:

Lightweight - high yield, 43kg per m2 @ 40 mm.
30% weight reduction compared to normal CA screed.
Smooth laitance-free finish.
Pumpable.
Full encapsulation of pipes and services.
Yield: 1.08 kg/mm/m².
CE Marked.
EN 13813: 2002.
Absolutely ideal for application in high-rise buildings.
For application at thicknesses of between 20 and 90 mm.
Perfectly level floors.
Installed nationwide by Smet Supported Partners.
Pumpable – first of its kind available.
Installed nationwide by Smet Supported Partners.
EPD certified – certificate available here.
Sustainable – as this calcium Sulphate binder naturally embodies less carbon than a cement-based binder.
German made EN 13813: 2002

General information

Finish	Smooth
Material	Calcium sulphate

Uniclass	Pr_35_31_06_47 Lightweight aggregate levelling screed mixesPrimary
CAWS	M10/150 Proprietary lightweight aggregate levelling screeds M13/120 Proprietary self smoothing levelling screeds

Product range	Floor Screeds

Specification data - Lightweight aggregate levelling screed mixes

Compressive strength - 28 days	C20.
Flexural strength	F4. Manufacturer guidance (28 days)
Tensile Adhesion	>1.5 N/mm².
Shrinkage	<0.1%. Manufacturer guidance (28 days)
Drying time	Hardening Times (Light foot traffic): After approx.12 hours; can be partially loaded after approx. 7 days. Hardening Time: Final Covering: approx. 2 – 6 weeks dependent on thickness and drying conditions on-site.
WaterContent	9-10 L per 27 kg bag. Manufacturer guidance (Recommended)
Reaction to fire	A1, Non-combustible.
ThermalConductivity	<0.40 W/mK.
Density	Fresh (wet) density: 1500 kg/m³; Hardened dry density: 1300 kg/m³. Guidance for specification option: Fresh (wet) density: 1,500 kg/m³. Hardened dry density: 1,300 kg/m³.
pH value	>7.0.
Thickness	Maximum Thickness: 70 mm. Minimum Thickness: Bonded: 20 mm. Unbonded: 30 mm. Domestic: 35 mm. Commercial: 40 mm. Over Underfloor heating Pipes: 25 mm (BS 8204-7).

Sustainability data

Contains Red List materials	No
Country of material origin	Germany
Country of product manufacture	Germany
Material	Calcium sulphate
Manufacturing plant location	99 Ellrich, Germany
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	1.20 kg CO₂ eq/kg