Sliding Over Roof Rooflight

Sliding Over Roof Rooflight

Glazing Vision Ltd Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

  • Secured By Design

    Secured By Design

    Certificate type

Electrically operated sliding rooflight with roof tracks to support opening section allowing larger sizes to be manufactured providing 100% opening. Includes dual colour thermally broken framework.

Jump to:
+44 (0)1379 658300 www.glazingvision.co.uk
Description

Sliding rooflight with one section sliding on rails over a roof, creating a 100% clear opening. All the glass is flush to allow water runoff and easy cleaning. Thermally broken frame detail and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation. Carriage design includes large diameter wheels to give minimal rolling resistance on the anodized rails.

All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within day. Manual override of the unit is via a 90° turn of an Allen key to engage/ disengage the motor from the drive mechanism and allow the product to be pushed open/ closed.

The rooflight is opened electrically, operated by a rocker switch positioned at the discretion of the client. It includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically. The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached. Includes drainage on rails to reduce build up of surface water on framework.

General information

Size

As drawing

As schedule

Color

Grey/white frame, clear glass

Features

100% clear opening, polyamide thermal breaks, dual sliding seal mechanism, superior thermally efficient glass

Material

Aluminium, glass

Shape

Rectangular

WarrantyDescription

Manufacturer's warranty

Uniclass 2015

Pr_30_59_72_31 Framed rooflightsPrimary

CAWS

L10/45 Rooflights

L10/460 Rooflights

Specification data - Framed rooflights

Product Reference

GV Sliding Over Roof Rooflight

Size

As drawing

As schedule

Colour/ Finish

Qualicoat approved polyester powder-coated, RAL 7015/ RAL 9010

Standard. RAL 7015 slate grey on the exterior; RAL 9010 white on the interior.

Qualicoat approved polyester powder-coated, RAL, special order

Dual colour; consult manufacturer and insert requirements.

Kerb

Special stepped kerb required, see manufacturers drawings.

Height

Insert requirement, 150 mm minimum.

Thickness

Insert requirements, dependent upon rooflight section; consult manufacturer's literature for more information.

Glazing

Double glazed

Triple glazed

Accessories

None

BMS integration

Proximity sensors

Rain sensor

Rain sensor overrides

Insert requirements

Remote control

Enduroshield easy clean glass coating

Gives a non-stick surface making the glass easier to clean and keep clean, stay clean for longer and resist staining and discoloration.

Ritec glass coating

Solenoid bolt

Remains disengaged at same time as drive mechanism, allowing for straight forward opening/ closing of rooflight in the event of control failure.

Thermostat

Standard product features

Frame material:

Extruded thermally broken aluminium profiles, grade 6063 T6.

Power supply:

24 V batteries, with 240 V mains supply for charging batteries.

Drive mechanism:

Rack and pinion.

Polyester powder coat paint finish:

To the Qualicoat standard.

Seals:

Combination of EPDM rubber seals and brush strip.

Security:

Anti-lifting mechanism to prevent disengagement of drive mechanism via vertical movement of sliding frame.

Rooflight control:

OR Control Board and magnetic limit switches.

Visual quality of glass:

To the Hadamar standard.

Product Options

Glazing:

- Double glazed:

  • Outer: 6 mm clear soft low E toughened heat soak tested.
  • Spacer: 16 mm black silicone sealed argon filled cavity.
  • Inner: 11.5 mm heat strengthened PVB laminated.

- Triple glazed:

  • Outer: 6 mm clear soft low E toughened heat soak tested.
  • Spacer: 14 mm black silicone sealed argon filled cavity.
  • Middle: 6 mm clear soft low E toughened heat soak tested.
  • Spacer: 14 mm black silicone sealed argon filled cavity.
  • Inner: 9.5 mm heat strengthened PVB laminated.

Digital objects
Platform Compatible Version Certified to
IFC

IFC2X3

1

1.3
IFC

IFC2X3

1

1.3
Revit

Revit 2016

2

2.0
Download now from NBS National BIM Library
Third party certifications
  • ISO 9001 : Compliant company
  • Electronics EMC : Electronics EMC tested and certificated
  • ISO 14001 : Compliant company
  • National Association of Rooflight Manufacturers (NARM): Members
  • to LPS 2081 : Approved product
  • Loss Prevention Certification Board (LPCB): LPS 2081 Issue 1:2015 : Certificated product
  • Qualicoat: To EN 12206-1 : Approved Applicator
Similar products from Glazing Vision Ltd