Secured By Design
Electrically operated glazed sliding rooflight with one section of glass sliding over a fixed section providing approx 50% opening. Includes dual colour thermally broken framework.
Sliding rooflight with one section sliding over another fixed section, creating a 50% clear opening. All the glass is flush to allow water runoff and easy cleaning. The thermally broken frame and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation. Carriage design includes large diameter wheels to give minimal rolling resistance on the anodized rails.
All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within day.
The rooflight is opened electrically, operated by a rocker switch positioned at the discretion of the client. It includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically. The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached.
Grey/white frame, clear glass
50% clear opening, manual override as standard, thermally broken frame, minimal footprint on roof
Sliding Over Fixed Rooflight
Qualicoat polyester powder-coated, RAL 7015/ RAL 9010
Standard. RAL 7015 slate grey on the exterior; RAL 9010 white on the interior.
Qualicoat polyester powder-coated, RAL, special order
Dual colour; consult manufacturer and insert requirements.
Insert requirement, 150 mm minimum.
Insert requirements, dependent upon rooflight section; consult manufacturer's literature for more information.
Rain sensor overrides
Ritec glass coating
Enduroshield easy clean glass coating
Gives a non-stick surface making the glass easier to clean and keep clean, stay clean for longer and resist staining and discoloration.
Standard product features
Extruded thermally broken aluminium profiles, grade 6063 T6.
24 V battery operated, 240 V mains supply required for trickle charging batteries via control board.
Polyester powder coat paint finish:
To the Qualicoat standard.
Combination of EPDM rubber seals and brush strip.
Anti-lifting mechanism to prevent lifting of sliding frame in windy conditions.
OR Control Board and magnetic limit switches.
Visual quality of glass:
To the Hadamar standard.
- Double glazed:
- Triple glazed:
Fixed Lantern Rooflight
Fixed Octagonal Pyramid Rooflight
Fixed Pyramid Rooflight
Fixed Ridgeglaze Rooflight
Flushglaze Fixed Circular Rooflight
Flushglaze Fixed Eaves Rooflight
Flushglaze Fixed Rooflight - One Wall Abutment
Flushglaze Fixed Rooflight - Singlepart
Flushglaze Fixed Rooflight - Three Wall Abutment
Flushglaze Fixed Rooflight - Two Wall Abutment
© 2021 NBS Enterprises Ltd. All rights reserved.