NBS Source
List your products
Application

Suitable for interior use on doors, columns and furniture.

Please note that due to the fact that wood is a natural product, each veneer may have colour and structure differences. Singularities such as knots and resin inclusions are not considered as defects. There are differences in light fastness performances depending on the wood species and the source of the wood - consult manufacturer for further details.

Description

A thin cladding of high-density stratified natural wood for interiors. The woodskin surface provides a slight satin appearance, providing the physical sensation of the grain and knots in the original wood veneer.

Features and benefits:

  • No maintenance required - the surface composition protects against adverse weather conditions, eliminating the need for any maintenance or treatment.
  • Curved panels - can be curved to a maximum radius of 25 cm, allowing its application on curved corners or columns.
  • Resistant to changes - resistant to atmospheric changes in humidity and temperature.
  • Manufactured in accordance with BS EN 438.

Applications:

Suitable for interior use on doors, columns and furniture.

Please note that due to the fact that wood is a natural product, each veneer may have colour and structure differences. Singularities such as knots and resin inclusions are not considered as defects. There are differences in light fastness performances depending on the wood species and the source of the wood - consult manufacturer for further details.

General information
Uniclass 2015
Wood veneers (Pr_25_71_94_98)Primary
Specification data - Wood veneers
Product Reference

Skin - Internal

Species/ Colour

Insert requirement from manufacturer's literature, many options available.

Standard product features

Board size:

2440 x 1220 mm.

Thickness:

1 mm.

Technical characteristics:

  • Resistance to surface wear (to BS EN 438-2 section 10): Revolutions: 0; initial wear point: ≥50; wear resistance: ≥150.
  • Resistance to immersion in boiling water (to BS EN 438-2 section 12): Pass.
  • Dimensional stability at high temperatures (to BS EN 438-2 section 17): Longitudinal: 0.75% (maximum); transversal: 1.25% (maximum).
  • Impact resistance (small diameter ball, to BS EN 438-2 section 20): ≥15 N.
  • Resistance to scratching (to BS EN 438-2 section 25): 2 rating.
  • Resistance to stain (to BS EN 438-2 section 26): Groups 1 and 2; ≥5; group 3: ≥4.
  • Light fastness xenon arc, to BS EN 438‑2 section 27): ≥2 greyscale rating.
  • Resistance to cigarette burns (to BS EN 438‑2 section 30): ≥3 rating.
  • Density (to BS EN ISO 1183): ≥1 g/cm³.
  • Reaction to fire (to BS EN 13501-1): D-s2, d0.

Similar products from Prodema UK & Ireland Ltd