Siniat Twin Frame Partition Twin(AB)-CS50R-15Un(170)

Intumescent acoustic sealant.

Guidance for specification option:

Apply 6 mm continuous beads of Siniat Intumescent Acoustic Sealant around the perimeter of the framing or to the edge of outer layers of board, ensuring that all air-paths are sealed. 

All penetrations should use supporting constructions detailed in the Siniat Drywall Manual unless superseded by specific test information. For combined, warrantied performance specify FSi fire-stopping products. For cPVC pipe sealing use FSI PYROPRO(R) Sealant in place of Siniat Intumescent Acoustic Sealant.

Guidance for specification option:

Insert requirements.

• Cold state maximum height: 4400 mm.
• EN fire state maximum height: 4000 mm.

EI 60 minutes to EN 13501-2.

45 Rw dB.

Severe.

Guidance for specification option:

Insert requirements or omit. If required as per Drywall manual.

Siniat Acoustic V Brace.

Guidance for specification option:

At maximum 1500 mm centres. Where extension is required, use Siniat dryliner channel or Siniat Primary channel to suit width of cavity. 

Twin(AB)-CS50R-15Un.

All products are CE marked and UKCA marked in accordance with construction products regulation.

Guidance for specification option:

Where relevant standards or European Technical Approvals exist

To BS EN 520, BS EN 10346, BS EN 10162, BS EN 14195 and BS EN 14566.

Guidance for specification option:

• All boards to conform to BS EN 520 or alternative standard where appropriate.
• Metal framing components are hot dipped galvanized steel to BS EN 10346.
• Metal sections rolled to BS EN 10162.
• Metal studs, tracks and accessories conform to BS EN 14195 where required.
• Drywall screws conform to BS EN 14566.

Spain

Guidance for specification option:

Applies to the bulk material (gypsum) only. Other components are from other countries. Consult manufacturer for details.

Plasterboard

Metal

Gypsum and metal components can be recycled depending on the segregation of all materials.