Siniat Twin Frame Partition Twin(AB)-CS50R-15Un(170)

All Siniat systems should be constructed to BS 8212:1995 and BS 8000-8:1989.

Guidance for specification option:

• BS 8212:1995 - 'Code of practice for drylining and partitioning using gypsum plasterboard'.
• BS 8000-8:1989 - 'Code of practice for plasterboard partitions and drylining.'

Siniat C Studs CS50/Rx; Siniat U Track Deep Flange UDT52/P; Siniat U Track UT52/Rx.

Guidance for specification option:

Studs:

• Twin Rows of 50 mm Siniat C Studs CS50/Rx at 600 mm centres. (400 mm centres if to be tiled).

Tracks (Head):

• Twin Rows of 52 mm Siniat U Track Deep Flange UDT52/P.

Tracks (Base):

• Twin Rows of 52 mm Siniat U Track UT52/Rx.

Track Note:

• For partition heights over 4.2 m, head/base track must be appropriate width Siniat Deep Flange U-Tracks as a minimum. For partition heights over 7.2 m, head/base track must be appropriate width Siniat Extra Deep Flange U-Tracks as a minimum.

Track Fixing:

• Head and base track fixed to structure at maximum 600 mm centres with suitable fixing by others.

Face A Plasterboard Linings - Outer Layer: 15 mm Siniat Universal Board.
Face B Plasterboard Linings - Outer Layer: 15 mm Siniat Universal Board.

35 mm Siniat Performance Self Tapping Screws at 300 mm centres.

Guidance for specification option:

Consult manufacturer and insert requirements or omit.

Not required.

Siniat Flat Strap FS90/W.

Guidance for specification option:

For use where partition height exceeds board height; to be fixed behind all horizontal joints to provide substrate for board fixing.

Siniat 18 mm pattress brackets.

Guidance for specification option:

Where required; contact manufacturer's technical services for more information.