Knauf Easybuild has been developed to reduce the number of components and speed up the construction of internal partitions in residential situations.
Knauf Silent Spacesaver is suitable in areas where floor space is at a premium and there is a requirement for a partition to provide a high level of sound reduction with a narrow width. The Knauf Silent Spacesaver system is quick to install, lightweight, and maximizes space within buildings.
Features and benefits:
To be installed in accordance with Knauf recommendations and British standards BS 8212-1995 and BS 8000-8:1994.
For socket penetrations, use Knauf Putty Pads. Where multiple, excessive penetrations occur, consider the use of the Knauf Wall Liner System as sacrificial layers - consult manufacturer for details.
Uniclass 2015 | |
CAWS | K10/125 Metal stud partition system K10/30 Metal stud |
Product Reference | Silent Spacesaver for Commercial Projects: Silent Spacesaver SSC3/13 |
Framing | - |
Stud configuration | 92 mm Knauf 'I' Stud, 0.55 gauge92 mm Knauf 'I' Stud, 0.9 gaugeStandard. |
Framing centres | 300 mm400 mmFor areas to receive a ceramic tiled finish. 600 mmStandard. |
Head/ Floor channel | 148 mm Knauf ‘U’ ChannelUtilising 148 mm Knauf Deep Flange 'U' Channel if deflection allowance is specified. |
Fixing | Knauf Nailable plugs at maximum 600 mm centresWhere alternative fixings are used to meet performance constraint confirmation is required from supplier. |
Lining | - |
Type | Two layers of 12.5 mm Knauf Soundshield Plus to each side |
Horizontal board joints | Knauf Flat Fixing Plate |
Lining fixings | Knauf Drywall ScrewsKnauf Performance Plus ScrewsTo be used with Knauf Performance Plus and Knauf Soundshield Plus Boards. |
Perimeter Sealing | Two continuous beads of Knauf Sealant on Head/ Floor ChannelsKnauf Intumescent and Acoustic Mastic |
Insulation | One layer of 25 mm Knauf Earthwool Acoustic Roll |
Head condition | Structural soffit |
Deflection allowance | To be determined by a structural engineer. Consult manufacturer for information. |
Head track fillets | Consult manufacturer and insert requirements. |
Head insulation detail | RequiredNot required |
Finishing | Taped and Jointed for a Seamless finish using Knauf Jointing ProductsTaped and skimmed with Knauf Finishing PlasterKnauf RMF [Ready Mixed Finishing] in accordance with General clauses |
Standard product features | Fire resistance (BS 476: Parts 20 and 22 Integrity and Insulation): 60 minutes. Acoustic rating (when tested to BS EN 10140-2:2010): 61 Rw dB. Partition thickness: 198 mm (excluding finishes). Maximum partition height (based on limiting deflection of L/240 at 200 Pa): 5700 mm. Duty rating (BS 5234: Part 2 Section 1.6.2 and 1.6.3): Severe. |
Product Options | Framing: - Stud configuration: At 600 mm centres (300 mm staggered centres) with Knauf Staggered Stud Clips. Use Knauf ‘C’ Studs at corners and abutments where required. |
Platform | Compatible | Version | Certified to |
---|---|---|---|
![]() | Revit 2017 | 1 | 1.3 |
Aquapanel Exterior Cladding System AEL01/13
Aquapanel Exterior Cladding System AEL02/13
Aquapanel Exterior Cladding System AEL03/13
Aquapanel Interior Cement Board AI2/13
Aquapanel Interior Cement Board AI1/11
Aquapanel Interior Cement Board AI3/11
Aquapanel Interior Cement Board AI4/13
Aquapanel Interior Cement Board AI5/13
Isolator for Commercial Projects: Isolator ILC1/13
Isolator for Commercial Projects: Isolator ILC2/13
© 2020 NBS Enterprises Ltd. All rights reserved.
1 / 1