NBS Source
List your products
Silcor® 900MP
Description

A premium performance two-component spray-applied seamless waterproofing membrane that rapidly cures to form a high-strength, elastomeric, and fully-bonded waterproof membrane. Unlike conventional liquid membranes, Silcor 900MP is extremely durable with excellent wear and chemical resistance and does not normally require additional protection against mechanical damage.

General information

Uniclass 2015

Pr_35_31_68_88 Thermoplastic block copolymer waterproof coatingsPrimary

CAWS

J31/353 Waterproof coating

J31/5 Cold deck roof coating

Specification data - Thermoplastic block copolymer waterproof coatings

Product Reference

Silcor® 900MP

Primer

Silcor® Primer EPF

Two-part epoxy primer.

Silcor® P20 PU Primer

Polyurethane primer.

Silcor® Primer EPF

Two-part epoxy primer.

Silcor® Primer EP LT

Three-component epoxy primer for cementitious and masonry substrates. Fast curing at low temperatures.

Silcor® Primer MT

Two-component phosphate/epoxy primer for metal substrates.

Accessories

None

Dry Quartz Silica Sand

For use with primers.

Hydroduct

Geocomposite drainage/ irrigation membrane.

Hydroduct Root Barrier

Standard product features

Performance:

  • Tensile strength (ISO 527): 15 MPa.
  • Elongation (ISO 527): ≥400%.
  • Tear resistance (ISO34-1 Method B): > 64 N/mm.
  • Water vapour permeability (ISO 15106-3): 9.9 g/m².day.
  • Methane permeability (ISO 15105-1): 30.6 mL/m².day.
  • Recovery at 400% elongation: 90%.
  • Shore hardness (ASTM 2240): 91A, 41D.
  • Abrasion resistance (Taber wear index: ASTM D4060): 255 mg.

Literature
Third party certifications
Similar products from GCP Applied Technologies

© 2020 NBS Enterprises Ltd. All rights reserved.