A pre-blended, ready to use, hard wearing, fibre suppressant dry shake topping for monolithic floors. It is formulated from dry cement powder, hard aggregates and compatible admixtures.
Sprinkled onto and floated into fresh wet concrete floors, and then power floated and power trowelled in the normal way, Sikafloor® – Fibreshield forms a smooth, low maintenance wearing surface suitable for any power floated concrete floor where a dense, abrasion resistant finish is sought and the appearance of steel/polypropylene fibres is undesirable in the floor required.
E41/335 Dry shake trowelled finish for wearing surfaces
E41/40 Trowelled finish for wearing surfaces
Sikafloor® – Fibreshield Fibre Suppressant Dry Shake Floor Hardener
|Standard product features|
When sealed Sikafloor® – Fibreshield provides increased resistance to the penetration of oils, grease etc and is easily cleaned.
Sikafloor® – Fibreshield should be sealed immediately after finishing using Sikafloor® ProSeal (formerly Armorex Proseal), a clear acrylic resin polymer solution which impregnates, cures and hardens the concrete surface.
Sikafloor® – Fibreshield is available in 1 colour: natural (non-pigmented).
© 2020 NBS Enterprises Ltd. All rights reserved.