NBS Source
Sikafloor® – Fibreshield (formerly Armorex Fibreshield)


A pre-blended, ready to use, hard wearing, fibre suppressant dry shake topping for monolithic floors. It is formulated from dry cement powder, hard aggregates and compatible admixtures.

Sprinkled onto and floated into fresh wet concrete floors, and then power floated and power trowelled in the normal way, Sikafloor® – Fibreshield forms a smooth, low maintenance wearing surface suitable for any power floated concrete floor where a dense, abrasion resistant finish is sought and the appearance of steel/polypropylene fibres is undesirable in the floor required.

General information

Uniclass 2015

Pr_35_31_85_82 Surface hardenersPrimary


E41/335 Dry shake trowelled finish for wearing surfaces

E41/40 Trowelled finish for wearing surfaces

Product range


Specification data - Surface hardeners

Product Reference

Sikafloor® – Fibreshield Fibre Suppressant Dry Shake Floor Hardener

Standard product features

When sealed Sikafloor® – Fibreshield provides increased resistance to the penetration of oils, grease etc and is easily cleaned.

Sikafloor® – Fibreshield should be sealed immediately after finishing using Sikafloor® ProSeal (formerly Armorex Proseal), a clear acrylic resin polymer solution which impregnates, cures and hardens the concrete surface.

Sikafloor® – Fibreshield is available in 1 colour: natural (non-pigmented).

Similar products from Sika Limited

Sikafloor® – 1 MetalTop (formerly Armorex Supertop)

Sikafloor® – 1 MetalTop (formerly Armorex Supertop)

Sikafloor® – 2 SynTop (formerly Armorex Armorshield)

Sikafloor® – 2 SynTop (formerly Armorex Armorshield)