SIDERISE FIP High Performance Acoustic Panel
SIDERISE FIP is a high performance acoustic panel solution used where an internal partition abuts a curtain wall or window mullion, acoustic performance 46dB Rw and up to 1hr fire performance.
SIDERISE FIP high performance acoustic panel is a thin multi-layered board offering exceptional sound transmission performance and has been specifically developed to provide a solution where an internal partition abuts a curtain wall or window mullion. Due to the impressive 46 dB Rw performance at only 31 mm thickness, the SIDERISE FIP high performance acoustic panel can also be used in many other conditions which demand the combination of a high sound reduction index (SRI) performance with a minimal thickness. This simple yet effective solution has been used on a number of projects which include hotels, residential, government and commercial buildings in both the UK and overseas.
Features and benefits:
- Fully tested acoustic performance.
- Maintains high ‘room-to-room’ separation.
- Improved reduction of noise pollution in adjoining areas.
- Very thin construction maintains ‘clean lines’ and minimizes obscuration of glazed areas.
- Simple to detail and easy to install.
- Up to one hour fire resistance.
| Finish | Sanded Standard. Unsanded |
| Uniclass 2015 | |
| CAWS | K10/115 Metal stud partition system K10/125 Metal stud partition system K10/15 Lining on timber K10/30 Metal stud |
| Product Reference | Siderise FIP High Performance Acoustic Panel |
| Size | - |
| Length | 2400 mmStandard. 2800 mmMinimum order quantity applies, contact manufacturer for details. |
| Width | 50–600 mm; insert requirements. |
| Thickness | 16 mmHalf thickness section for combination during installation. 31 mmStandard. |
| Finish | SandedStandard. Unsanded |
| Product Options | Finish: As standard, the product is supplied unfinished to be separately clad with a thin covering (e.g. decorative laminate or coated metal plate). Normally a decorative covering is applied to both sides. Alternatively, it can be supplied in a pre-sanded form for direct decoration on site. Fire performance: The product comprises boards which are inherently non-combustible and is considered fire safe. It has been tested to the temperature and pressure conditions of BS EN 1363-1 and the test principles of BS EN 1366-4 and achieved a 60/60 rating, (E) integrity was in excess of 80 minutes. Test report BMT/FEI/F15081 refers. From this test data the standard Siderise FIP panel can offer the following fire resistance ratings: 60 minutes (E) integrity and 60 minutes (I) insulation. Higher performance ratings may be possible from formal assessment of specific project details and construction materials. |
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
 Revit | Revit 2016 | 3 | 2.0 |
 IFC | IFC2X3 | 2 | 1.3 |