Cavity Tray. Siderise CT Cavity Tray - Horizontal Cavity Trays

Siderise CT Cavity Tray has been specially developed to meet the new requirements of Approved Document B for relevant buildings, where the use of traditional combustible cavity trays is no longer permitted above 18m in steel-framed structures (SFS).

Reaction to Fire

Siderise CT Cavity Tray has a ‘Reaction to Fire’ classification of ‘A2-s1, d0' to EN 13501-1 (Classification report available on request) and is therefore compliant for use with steel-framed structures (SFS) in relevant buildings above 18m.

Damp Proofing

As with traditional cavity trays, Siderise CT Cavity Tray provides an essential damp proof course (DPC) that crosses the cavity of a masonry wall to direct water out of the external face of the wall and to prevent dampness from permeating the internal skin of a wall.

Siderise CT Cavity Tray is a lightweight solution that is simple to install and provides a durable solution to the problem of damp penetration below the roofline of a masonry structure. The Siderise CT Cavity Tray is easy to handle and can be installed on-site without any specialist equipment.

Physical Properties

The Cavity Tray product has a running length of 1m with a 50mm overlap joint. It is manufactured to triangular sections with a height of 150mm, an additional 50mm ‘top flange’ to the back wall, and a 105mm ‘bottom flange’ at the base. The width of the Cavity Tray is then manufactured to suit the cavity size. A typical cavity width accommodated for the product is between 100mm to 350mm (for other cavities please contact Technical Services). Drainage is facilitated via weep holes as normal.