Compare

Shotblasted Cellular Block - Aggregate concrete blocks

Name: Shotblasted Cellular Block - Aggregate concrete blocks
Brand: Colinwell Masonry
SKU: vq4aao2Wu3Ee5H72o31pDr

Verified by manufacturer 4 months ago

Cellular

Colinwell Masonry

Third party certifications:

BBA Agrément Certificate
Certificate type
NSAI Agrément Certificate
Certificate type

Colinwell Shotblasted Concrete Masonry Blocks have matt texture, that exposes more of the aggregate used in the manufacture of the block and leaving a natural weathered texture.

Jump to:

+44 (0)28 9061 8145 Website

Application

Suitable for use in the construction of external and internal loadbearing and non-loadbearing walls, including the inner and outer leaves of cavity walls, party walls, partition walls and boundary walls.
Can also be used as reinforced masonry walls through incorporation of bed joint reinforcement.

Description

Masonry block with a shotblasted face finish. Manufactured from cement, graded aggregates, an integral waterproofer and pigment.

Features and benefits:

Versatile.
Suitable for environments where robust, durable finishes are required.
Good weathering characteristics.
Complements other building finishes, including traditional facing bricks, curtain walling and rainscreen cladding.
Water and frost-resistant, helping to retain a fresh, clean appearance.
Manufactured in accordance with BS EN 771-3 and BS 5628-1.
Cured by steam to give the blocks efflorescence-free performance characteristics.
Blocks are efflorescence free.
Minimal maintenance required.
Non-combustible and will not contribute to the spread of flame.
Available in a variety of colours.

General information

Color Available in a variety of colours.	Grey Red Cream Green Gold Yellow White Show more
Finish Shotblasted face finish.	-
Material	Concrete
Shape	Rectangle
Length	440 mm
Width	100 mm 140 mm 215 mm
Height	215 mm

Uniclass	Pr_20_93_52_01 Aggregate concrete blocksPrimary
CAWS	F10/18 Concrete facing blockwork F10/255 Concrete facing blockwork

Product range	Blocks

Specification data - Aggregate concrete blocks

Standard	To BS EN 771-3 and BS 5628-1.
Block description	Cellular, shotblasted face finish, graded aggregate, precast concrete masonry blocks.
Compressive strength	-
Mean value	15 N/mm².
Freeze/ thaw resistance Water and frost-resistant, helping to retain a fresh, clean appearance.	-
Thermal conductivity	1.25 W/m·K.
Work sizes (length x width x height)	440 x 100 x 225 mm. 440 x 140 x 225 mm.
Accessory and special shape types Non-standard components and specials may be cut from standard units or, depending on quantity, manufactured to individual requirements. Consult manufacturer and insert requirements.	Not required. Bond-beam blocks. Cavity closers. Cills. Half blocks. Lintels. Quoins. Squints.
Tolerance category	D2. To BS EN 771-5.
Reaction to fire Non-combustible and will not contribute to the spread of flame.	-

Colour	Bracken. Recommended mortar: Maroon U53. Buff. Recommended mortar: Beige E74. Cream. Recommended mortar: Cream G89. White cement should be used in the mix. Green. Recommended mortar: Green N70. White cement should be used in the mix. Honey. Recommended mortar: Tan C30. Natural. Recommended mortar: Standard. Red. Recommended mortar: Orange T36. Sandstone. Recommended mortar: Cream G89. White cement should be used in the mix. Straw. Recommended mortar: Yellow D10. Whinstone. Recommended mortar: Black L62. White. Recommended mortar: White J88. White cement should be used in the mix. Show more
Mortar type Refer to manufacturer recommended mortar in colour specification guidance.	Manufacturer standard. Maroon U53. Beige E74. Cream G89. Green N70. Tan C30. White J88. Orange T36. Yellow D10. Black L62. Show more
Mortar mix	See manufacturer's literature and insert requirements.
Joint	See manufacturer's literature and insert requirements.
Spacing	6–10 m. Spacing between control joint interval.
Material/ Finish	Concrete, shotblasted face finish.
Efflorescence	None.
Average density	2100 kg/m³.
Shrinkage	<0.04% (drying). To BS EN 772.4.
Water absorption	3–6%.
Bond strength	0.15 N/mm² (in shear). To BS EN 998.2, Annexure C.
Moisture movement	0.15 mm/m (maximum).