ShieldTEC Warm Roof Hotmelt Waterproofing System
Verified by manufacturer over a year ago
BBA Agrément Certificate
Certificate type
ISO 9001 Quality Management
Certificate type
Fully bonded bitumen based hot melt waterproofing membrane system for warm roofs.
Application
ShieldTEC provides a tough, flexible, non- tracking, self-sealing waterproof membrane for use on inverted, warm, cold, hybrid, blue and living flat roofs and podium areas. ShieldTEC is also suitable for use as a damp-proof membrane in solid concrete floors or as the waterproofing layer above or below ground in concrete, brick or blockwork structures.
Description
A specially formulated combination of high quality bitumen, synthetic rubbers, lightweight fillers and other additives, which is hot-applied with carefully selected reinforcement fabrics and protection layers to give a monolithic waterproofing system. ShieldTEC Warm Roof Hotmelt system achieves a Broof (T4) reaction to fire without the need for additional fire resistant coverings allowing for a light weight fire resistant system.
Components:
- ShieldPRIME - A brush or roller applied bituminous priming solution for the preparation of cementitious surfaces to receive ShieldTEC monolithic membrane.
- ShieldTEC PS2 - A vapour control membrane with a nominal mass of 2 kg/m².
- Suitable Shield insulation.
- ShieldTEC Monolithic Hot Melt - A hot applied specially formulated combination of refined polymer-modified bitumen, synthetic rubbers, fillers and other additives.
- ShieldTEC PS2 - VCL, ShieldTEC PS4 - Underlay or ShieldTEC PS5 - Mineral cap sheet or ShieldROOT M - Root resistant protection membrane.
Features and benefits:
- Hot applied system.
- Broof (T4) without additional coverings
- Suitable for completely flat (zero falls) decks.
- BBA Certified No. 20/5793
- Outstanding durability – lasts the life of the building.
- Tough and resistant to impact damage.
- High bond strength to substrate and insulation
- High tensile strength.
- Monolithic application.
- Rapid setting
- Resistant to rain, snow and frost immediately after application.
- Fully bonded system – Non-tracking.
General information
Color | Grey Guidance for specification option: Charcoal grey. |
Finish | Slate chippings |
Material | Bitumen |
Warranty description | 25 year Guidance for specification option: Up to |
Uniclass | |
CAWS | J41/110 Built-up reinforced bitumen membrane warm deck roof covering |
Specification data - Reinforced bitumen membrane warm roof covering systems
Preparation | |
Horizontal work | ShieldPRIME. |
Skirtings and vertical work | ShieldPRIME. |
Air and vapour control layer | |
Type | ShieldTEC PS2.Guidance for specification option: 2 kg/m². |
Insulation | |
Type | ShieldBOARD PIR.ShieldWOOL.ShieldGLASS. |
Waterproof covering | |
First layer | |
Type | ShieldTEC Monolithic Hot Melt.Guidance for specification option: A hot applied specially formulated combination of refined polymer-modified bitumen, synthetic rubbers, fillers and other additives. |
Top layer | |
Type | ShieldTEC PS2.Guidance for specification option: VCL, 2 kg/m². ShieldTEC PS4.Guidance for specification option: Underlay, 4 kg/m². ShieldTEC PS5 .Guidance for specification option: Mineral cap sheet, 5 kg/m². ShieldROOT M.Guidance for specification option: Root resistant protection membrane. |
Sustainability data
Country of product manufacture | United Kingdom |
Recyclability | 100% |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 10 % Guidance for specification option: Up to. |
Third party certifications
BBA Agrément Certificate
20/5793 ShieldTEC Warm Roof Hotmelt System
ISO 9001 Quality Management
ISO 9001 Quality Management System
Similar products from Shield Membranes Ltd
ULTRAShield High Performance Felt Membrane System