Mid-range horizontal sliding (HS) secondary glazing.
Mid-range, horizontal sliding (HS) secondary glazing unit with robust but slender framing sections. Available with two, three or four sliding sash options. Designed to be removable to provide easy access to the outer window, facilitating cleaning and maintenance.
All fixings are concealed within the frame, which may be linked to other frames with a colour-matched mullion/ transom section.
Fitted with high performance brush seals that will almost eliminate drafts and ensure greater comfort near the window.
Suitable for listed buildings where the primary glazing cannot be changed. It is a reversible adaptation, so generally accepted by heritage agencies.
Blast tested to ISO 16933 Classification code EXV 33 (two pane only).
Twin compression seals, concealed fixings, can be coupled to other units with colour matched aluminium alloy transom/ mullion
Extruded aluminium alloy 6063-T6
Ten year manufacturers guarantee subject to Selectaglaze terms and conditions
|Uniclass 2015||Putty-fronted single glazing systems (Ss_25_60_35_65)|
Series 15 Mid-range Horizontal Sliding (HS)
As primary window designs/ sightlines
Horizontal sliding, two pane
Horizontal sliding, three pane
Horizontal sliding, three pane, centre
Insert required dB level.
See 'Options' below and insert requirements.
ISO 16933 EXV 33
Horizontal sliding, two pane only.
Anodizing, Analok bronze AA25
Anodizing, Analok silver AA10
Polyester powder-coating, HIPCA 9910 semi-gloss white
Polyester powder-coating, RAL
Insert RAL colour.
Wood grain effect
L2 fitch catch (lockable), black
L2 fitch catch (lockable), brushed steel
L2 fitch catch (lockable), gold
L2 fitch catch (lockable), polished chrome
L2 fitch catch (lockable), white
L24 S15/25 sliding latch, colour matched to frame
Over the frame acoustic ventilator
Over the frame standard ventilator
|Acoustic reveal linings|
Vinyl faced acoustic foam
|Standard product features|
Extruded aluminium alloy 6063-T6.
H3 recessed finger pull, colour matched to frame.
- Running gear:
Stainless steel ball races.
Single sash maximum width: 1500 mm. Sash height to width ratio should not normally exceed 4:1.
- Maximum frame sizes (h x w):
- Minimum frame size (h x w):
350 x 250 mm.
Values of <2.9 W/m²K available; consult manufacturer for details.
Can be fitted with a lockable fitch catch and glazed with a laminated glass which will provide some resistance to forced entry - consult manufacturer for details.
Series 10 Slimline Horizontal Sliding 2 Pane
Series 10 Slimline Horizontal Sliding 3 Pane
Series 10 Slimline Horizontal Sliding 3 Pane Centre
Series 10 Slimline Horizontal Sliding 4 Pane
Series 15 Mid-Range Horizontal Sliding 3 Pane
Series 20 Slimline Vertical Sliding
Series 25 Mid-Range Vertical Sliding
Series 30 Slimline Lift Out
Series 30 Slimline Shuffle Out
Series 41 Heavy Duty Lift Out