Industrial-style steel roller shutter, with foam-filled slat profile.
Suitable for commercial and industrial applications. This product can be installed internally or externally.
Industrial-style steel roller shutter, with foam-filled slat profile. This insulated steel profile is especially resistant to damage, and reduces deflection. With the option of interior and exterior identical colour coating, the insulated shutter can easily be blended into the look of any building, and is also available with a galvanized finish.
Minimal thermal bridges and the use of fine-pored polyurethane (PU) rigid foam infill ensure good thermal insulation, whilst curtain and sealing technology used around the entire shutter reduces noise from both inside and outside.
Features and benefits:
Application:
Suitable for commercial and industrial applications. This product can be installed internally or externally.
Finish | GalvanizedStandard. MillPowder-coatedInsert requirements. |
Uniclass 2015 |
Product Reference | SeceuroDoor 95SeceuroDoor Vision 95100 x 55 mm clear perspex. |
Finish | GalvanizedStandard. MillPowder-coatedInsert requirements. |
Motor | Consult manufacturer for details and insert requirements. |
Accessories | NoneBullet lockNot on wind guides. |
Standard product features | Size (h x w, minimum–maximum): 1000–7000 mm. (Maximum width for powder-coating is 6500 mm; above 6400 mm high, guide is supplied in two parts). - Laths: Nominally 95 mm high x 20 mm thick. - Bottom slat (h x d): 70 x 20 mm. - Hood and fascia: To suit end plate (350–550 mm) - Guide channels (w x d): 80 x 52 mm. 80 x 78.5 mm windlock guides. Construction: - Laths:
- Bottom slats: Extruded bottom slat. - Hood and fascia: Two or three-piece steel casing with steel endplates. - Guide channels: 3 mm galvanized steel channels. Operation: - Electric: Electric operation is by a single or three-phase motor, either direct-drive or chain-driven. Control is by either a control panel or a momentary switch, which must be held until the shutter reaches the desired position. Weight:
Fixings: Varies depending on the application; consult the literature for details. The hood is fixed at each end and 1000 mm centres. |