Schöck Bole® - Punching shear reinforcement
Verified by manufacturer 2 months ago
Schöck Bole® Type O
Schöck Bole® Type O
UK Technical Assessment (UKTA)
Certificate type
Punching shear reinforcement.
Application
Perfect solution to provide punching shear reinforcement in flat slabs.
Description
Schöck Bole® is a punching shear reinforcement consisting of double headed studs with spacing bars to secure correct positioning. The various types of Schöck Bole® facilitate time-saving installation in different situations. Schöck Bole® type O is mounted after and type U before installation of the top and bottom slab reinforcement.
Features and benefits:
- Punching of flat slabs: The shear force capacity of flat slabs at the column connection is very limited. High loads can occur causing a fatal punching failure. This can be avoided by using Schöck Bole®.
- Perfect anchorage: Due to forged head on both ends of the stud.
- Reference label: The label at the first stud shows the exact description of the element.
- Non load-bearing weld: The studs are only welded on spacer bars in order to ensure the distances.
- European technical assessed with CE-mark based on ETA-13/0076.
General information
Color | Grey |
Material | Carbon steel |
Uniclass | |
CAWS | E30/240 Proprietary prefabricated reinforcement |
Specification data - Prefabricated reinforcement
Application | Shear heads. |
Diameter | 10 mm.Guidance for specification option: 30 mm head diameter, 34.4 kN tensile yield strength. 12 mm.Guidance for specification option: 36 mm head diameter, 49.2 kN tensile yield strength. 14 mm.Guidance for specification option: 42 mm head diameter, 67 kN tensile yield strength. 16 mm.Guidance for specification option: 48 mm head diameter, 87.4 kN tensile yield strength. 20 mm.Guidance for specification option: 60 mm head diameter, 136.6 kN tensile yield strength. 25 mm.Guidance for specification option: 75 mm head diameter, 213.6 kN tensile yield strength. |
Third party certification | European Technical Assessment - ETA-13/0076. |
Type | O. Guidance for specification option: Punching shear reinforcement Schöck Bole® type O is mounted after installation of the top and bottom slab reinforcement. This approach to installation is particularly recommended for slab thicknesses up to 30 cm and moderate reinforcement requirements. The product is supplied ready for installation; no further parts are needed for assembly. Schöck Bole® type O is suitable for installation on site.
|
Number | Manufacturer guidanceInsert requirement. |
Anchor length | Manufacturer guidanceInsert requirement, available 130–400 mm dependent on anchor diameter. |
Anchor spacing | Manufacturer guidanceInsert requirement. |
Strip length | Manufacturer guidanceInsert requirement. |
Third party certifications
UK Technical Assessment (UKTA)
UK Technical Assessment UKTA-0836-22/6454 - Schöck Bole punching shear reinforcement
Literature
Brochure Schöck Bole
Technical Information Schöck Bole
Case studies
Residential Complex "Green Center"
Harbour Central
New Victoria, Manchester
Napier House, Essex
The Beckett, Tunbridge Wells