NBS Source


Suita­ble for balconies, terraces, roof terraces and other accessible spaces.


A combinable tile and paver support system which enables individual assembly heights from 3 mm to over 1 m.

Features and benefits:

  • It is suitable for levelling any sloped assembly of up to 10%.
  • It enables access to pipelines and floor drains in the remaining hollow space.
  • Due to the open joints between the tiles and pavers, surface water can freely drain on to the substrate and, if fitted, into the drainage system beneath.
  • Typically, the tiles and pavers should be at least 20 mm thick and must be self-supporting.

General information





3 x 200 mm

Schlüter®-TROBA-LEVEL-LV 3.

10 x 120 mm

Schlüter®-TROBA-LEVEL-PL 10.

60 x 200 mm

Schlüter®-TROBA-LEVEL-PLV 60. Adjustable up to 130 mm.

Uniclass 2015

Pr_20_85_47_22 Decking and paving pedestalsPrimary


J21/467 Support system for precast concrete paving slabs

J21/85 Precast concrete paving slabs

J31/370 Precast concrete paving slabs

J31/375 Paving tiles

J31/80 Precast concrete paving slabs

J41/467 Support system for precast concrete paving slabs

J41/90 Precast concrete paving slabs

J42/467 Support system for precast concrete paving slabs

K41/320 Pedestals

Q37/460 Support pedestals

Q55/395 Support pedestals

Product range

Tile and Paver Systems

Specification data - Decking and paving pedestals Enhanced data

Pedestal type



Polypropylene and polyethylene.


60–130 mm.


Not required.

Schlüter®-TROBA-LEVEL-PLS 6.

Protective support pad, 260 x 260 mm, rubber granulate/ one-sided aluminium lining.


Drainage channel.


Gravel retaining angle.

Tile and paver supports

Schlüter®-TROBA-LEVEL-LV 3.

3 mm high, 200 mm diameter, polypropylene.

Schlüter®-TROBA-LEVEL-PL 10.

10 mm high, 120 mm diameter, polyethylene.

Schlüter®-TROBA-LEVEL-PLV 60.

Adjustable - 60–130 mm high, 200 mm diameter, polypropylene.

Height adaptors

Schlüter®-TROBA-LEVEL-AP 1.

Levelling platelet which adjusts the assembly height by 1 mm. Up to ten can be stacked together, enabling the assembly height at the corner of each paver or tile to be adjusted by up to 10 mm, thus accommodating minor variations in tile or paver thickness or substrate level.

Schlüter®-TROBA-LEVEL-PLA 30.

30 mm height adapter which must be used between two Schlüter®-TROBA-LEVEL-PL 10 tile and paver supports. Up to ten can be stacked together to create an assembly height of between 50–320 mm.

Schlüter®-TROBA-LEVEL-PLA 70.

70 mm height adapter which enables the quick installation of larger heights. It must be fully screwed into the bottom plate of Schlüter®-TROBA-LEVEL-PLV 60. The thread features a protection mech­anism against accidental loosening and a vibration lock. It is not designed for levelling.

Environmental information

Country of material origin


Similar products from Schlüter-Systems Ltd