NBS Source
I'm a manufacturer

S-Quad Beam Detection - Fire Alarm Beam Detection

Verified by manufacturer 5 days ago

Gent Product certifications:
  • LPCB Certification

    LPCB Certification

    Certificate type

Loop powered and connected Analogue Addressable Beam sensor pair (transmitter and receiver).

Jump to:
+44 (0) 203 4091779 Website

Application

S-Quad Beam Sensors provides an enhanced solution for linear beam detection for applications where point detection is either not practical, ceiling heights greater than 10.5m examples are Warehousing, Sprots Halls, Atria, Auditoria etc...

Description

Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensor Pair provides an enhanced solution for linear beam detection for applications where Gent S4 Vigilon point detection is either not practical or economic.

Powered and controlled via the 2 core loop, the beam is a market leading device with features such as one man alignment and commissioning which is achieved using the auto gain setting, this ensures the optimum alignment is reached.

Maintenance of the beam is enhanced with a key operated test feature which simulates the obscuration of the beam in a fire.

The Gent loop powered beam is certified to EN 54 parts 12 and 17. Compatible with the full range of Vigilon and Nano control panels the S-Quad beam uses the panel software to ensure a fast response to fire while offering software filters to reduce the number of unwanted alarms.

Features and benefits:

  • S-Quad Beam pairs are loop powered supporting 16 pairs per loop.
  • Each beam can be set to one of six sensitivity states to provide a best fit for individual applications.
  • The beam provides increased resilience to interference from the sun and other light sources.
  • Remote key switch provides test facility at ground level without the need to gain access to beams mounted in high areas.
  • The beam incorporates an LED array to indicate signal strength allowing accurate alignment during one person commissioning.
  • Optimum sensitivity is maintained by automatic gain setting triggered at the beam during alignment.
  • The optical lens design is intended to minimise build-up of dust to reduce the maintenance and cleaning required.
  • The S-Quad beam is compatible with early versions of the Vigilon Beam using the S-Quad programming base avoiding the need to upgrade to latest control software.
  • Short circuit isolator in each device.
  • SOFT Addressing technique, no need for DIP switch, EPROMS or programming at time of installation.
  • Beam length from 2m to 100m.
  • EN5412 & 17 Certified.

General information

Color

White

Material

Acrylonitrile butadiene styrene (ABS)

Shape

Circle

Length

117 mm

Width

117 mm

Height

54 mm

Uniclass

Pr_75_80_30_59 Optical beam smoke detectorsPrimary

CAWS

W90/329 Optical beam smoke detectors

SKU Code

S4-34740

Specification data - Optical beam smoke detectors

Classification data

Standard

To BS EN 54-12 and BS EN 54-17.

Third-party certification

LPCB-approved.

Manufacturer guidance

LPCB number 042 bh.

Detector type

End to end.

Operating range (minimum)

100 m.

Ingress protection (minimum)

IP30 (IP20 when mounted on bracket).

Controller

-

Display type

Two red and seven green LEDs.

Guidance for specification option:

Visible at 500 LUX ambient light levels 5 m.

Display the following information

Strength of received signal (%).

Guidance for specification option:

Signal strength 9 x LED matirx.

Functions

Linear beam detection.

Power source

From loop.

Operating voltage

35–41 V.

Emissions

To BS EN50081-1, Class B.

Sustainability data

Material

Acrylonitrile butadiene styrene (ABS)

Product certifications

LPCB Certification

LPCB Certification

Honeywell Gent S4-34740 EN Certificate of Approval

Literature

Honeywell Gent S-Quad Beam Detection

Honeywell Gent S-Quad Beam Detection

Honeywell Gent S4-34740 EN54-12 & 17 Declaration of Performance

Honeywell Gent S4-34740 EN54-12 & 17 Declaration of Performance

Honeywell Gent S4-34740 Installation instructions

Honeywell Gent S4-34740 Installation instructions

Honeywell Gent Vigilon Plus Control Panels

Honeywell Gent Vigilon Plus Control Panels