Roll-up doors and roller shutters, produced to European safety standards from high-grade stainless steel, weather-resistant and easy to look after.
Suitable for internal and external use.
Possible applications range from use as a night shutter for large display windows in shopping malls, through entrances and exits for underground parking garages at hotels, office buildings, airports, stadiums or residential units, through to the separation of access areas in industry or gastronomy.
Stainless steel roller shutters deliver a high degree of functional reliability, and offer a long service life and low maintenance costs.
Features and benefits:
Maximum: 8000 mm (dependent on mesh and motor types specified).
Up to 5000 mm.
L20/612 Roller grilles
To DIN EN 13241-1.
Produced to European safety standards from high-grade stainless steel.
Consult manufacturer's literature for details of brackets, guides etc.
Up to 5000 mm high and 8000 mm wide.
Lateral, face-fitted across opening.
Lateral, fitted into reveal.
Resistance to wind load
End profile: 2 x stainless steel angle 60 x 40 mm, 3 mm thick.
Stainless steel mesh, Lago.
Total mesh thickness: 3.5 mm.
Weight: 6.8 kg/m².
Free area: 44%.
Solar factor: gtotal 0,38, Fc 0,56.
Stainless steel mesh, Sambesi.
Total mesh thickness: 7.0 mm.
Weight: 10.75 kg/m².
Free area: 42%.
Solar factor: gtotal 0,32, Fc 0,55.
Stainless steel mesh, Tigris.
Total mesh thickness: 6.2 mm.
Weight: 6.4 kg/m².
Free area: 65%.
Solar factor: gtotal 0,46, Fc 0,78.
Finish and colour
Frame and guides
To suit substrate; insert requirements.
Dead man's control system, TS 959.
For all GfA-ELEKTROMATEN units with DES or NES.
Consult manufacturer's literature for full specification.
DES digital limit switch.
NES cam limit switch.
Light reflection barrier.
Motor type required will depend on mesh type and overall dimensions specified; consult manufacturer's literature for details.
*Maximum cycles per hour may also vary depending on operating conditions; consult manufacturer for details.
External motor, GfA.
Country of material origin
Country of product manufacture