NBS Source
List your products
Description

Roller shutter, double-skinned, insulated, made of steel profiles, galvanized consoles. Resistance to wind load in accordance with EN 12424 class 2. With header seal and prime coated winding shaft.

Fixing applications:

  • Masonry.
  • Concrete.
  • Steel.
  • Autoclaved aerated concrete.
  • Wooden framework.

General information
Finish

Coil-coated steel

Galvanized steel

Uniclass 2015 Roller shutters (Pr_30_59_84_73)
Specification data
Product Reference

Roller Shutter Thermo Teck

Colour

Polyester powder coated, RAL

Optional, available in any RAL colour.

Finish

Coil-coated steel

Galvanized steel

Glazing

Required

Not required

Drive

Chain drive

With separate anti-drop device.

Direct mount drive

With integrated anti-drop device.

Accessories

Various items of special equipment and control devices are available, consult manufacturer and insert requirements.

Standard product features

Heat insulation (EN ISO 12567-1):

3.5 W/m²k (typical).

Sound insulation:

RW 20 dB.

Air permeability (EN 12426):

Class: 0.

Resistance to wind load (EN 12424):

Class: 2.

Resistance to water penetration (EN 12489):

Class: 0.

General:

  • Door curtain: Hinge-like interconnected galvanized steel.
  • Glazing: ThermoTeck synthetic glazing, crystal clear, approximately 150 x 55 mm.
  • Bottom seal: Double-skinned box profile made of aluminium with permanently elastic and frost-proof EPDM profile hose seal for a sealed bottom door edge.
  • End caps: Robust, wear and corrosion-free plastic parts for fixing the profiles.
  • Wind hooks: For high wind loads and large widths; the doors are equipped with wind hooks and a reinforced bottom seal.
  • Guide rails: Robust, steel profiles with wear-proof, easy-to-change plastic guides.
  • Consoles: Galvanized steel.
  • Locking: All locks connected to door control unit via safety switches. Bottom profile lockable from inside via two locking rods with profile cylinder. Bottom profile lockable from inside and outside via two locking rods with profile cylinder. Sliding bolt on the inside.