NBS Source
List your products
Roller Shutter Seceuro CD150 Built On
Application

  • Domestic/ commercial windows.
  • Doors.
  • Serveries.
  • Cabinets.

Description

Seceuro CD150 built on roller shutters, double skin foam filled aluminium slat, vented as standard but also available non-vented.

Applications:

  • Domestic/ commercial windows.
  • Doors.
  • Serveries.
  • Cabinets.

General information

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary

CAWS

L20/60 Doors

L20/610 Roller shutters/ curtains

Specification data - Roller shutters

Product Reference

Seceuro CD150 Built On Roller Shutters

Height

1600 mm

Box size: 165 mm.

2000 mm

Box size: 165 mm.

2800 mm

Box size: 165 mm.

Width

Maximum: 3400 mm. Insert requirements.

Finish

-

Box

White or dark brown as standard. The box can be powder coated to alternative standard RAL or BS colours at an extra cost.

Guide rail

White or dark brown as standard. The guide rails can be powder coated to alternative standard RAL or BS colours at an extra cost.

Shutter

Brown

Cream

White

Wood grain effect

Bottom slat

Dark brown

White

Controls

Consult manufacturer and insert requirements.

Standard product features

Shutter box:

- Dimensions (nominal):

40 mm high x 9 mm thick.

- Construction:

  • Roll formed aluminium in two sections; top and bottom boxes.
  • Bottom box removable for installation and maintenance and chamfered at 45°.
  • The shutter box is assembled on die cast aluminium endplates.

- Weight:

4.5 kg/m².

Guide rails:

Extruded aluminium with an integral box section for reinforcement and to facilitate fixing. High density6 mm pile brush seals for quiet and smooth operation. 53 x 25 mm (w x d).

Security level:

Medium to low security.

Product Options

Rod crank operation:

For shutters up to 25 kg. Incorporates a geared rod crank handle 1500 mm long which hangs vertically and secures into a clip when not in use. The gear is installed in the box and the gear ratio varies with shutter weight.

Spring loading:

A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.

Swivel belt winder:

For shutters up to 15 kg. The swivel winder coils the belt when it is pulled to open the shutter. The belt is 14 mm wide and grey in colour. External shutters are supplied with a guide tube to protect the belt through the building wall.

Geared belt winder:

For shutters between 15–25 kg. 1:3 ratio with removable handle for belt operated shutters. Single phase electric provision of a 13 A fused spur is required for installation. A tubular motor within the barrel assembly with limit switches and the thermal cut out to prevent overheating. Draw240 V and 0.5–2.5 A dependent upon the shutter size.

Control:

Standard security keyswitch or rocker switch. Other controls are available on request.

Override:

A manual override should be priced and ordered separately for shutters which are to be installed on exit doorways to permit operation in the event of a power failure. This is usually operable from only one side.

Similar products from HAG Ltd. - The Door Specialists