Roller Shutter - Industrial

Electrically operated industrial roller shutter designed to comply with the current British and EEC safety regulations. Optional specification levels can be varied to meet any special operational requirements.

Features and benefits:

• 75 mm convex interlocking galvanized roller shutter laths retained at ends by malleable steel end wearing lugs riveted on via solid steel rivets. This section is available in three thicknesses (18 G, 20 G and 22 G); this considerably varies the cost and significantly improves rigidity, security and wind resistance as the section thickness increases.
• Optional guide depth 50, 75,100 for standard guides and 65 or 100 wind guides coupled with wind end lugs to achieve class 5 wind resistance.
• The standard unit is prewired with a surface fixed braided cable and requires a three phase 380–440 V and neutral socket mounted approximately 0.5 m from the opening and 1.5 m above floor level on the motor side.
• Safedrive® direct drive geared motor unit including limit over–run protection. High precision worm gearbox incorporating separate safety brake negates the necessity for auxiliary safety brake. Plug-in pre wired control system with integral press buttons. Where side room is at a premium, a flange mounted chain driven motor can be used instead, reducing the side room however a safety brake will be required at the non motor end with requirements to circa 200 mm.