The C2 model provides the high quality security level of the Armourguard range with a superior long life HP200 plastisol coating.
76 mm curved solid 22 gauge laths, galvanized and with HP200 Plastisol colour coated finish externally and corrosion resistant finish internally - for commercial and industrial high security applications.
HP200 is Corus roofing and cladding steel with a 2000 micrometre (nominal thickness) high-performance Plastisol coating on a Galvatite hot dip zinc coated substrate to BS EN 10146.
The standard reverse side coating is a specially formulated two-coat protective system of corrosion resistant primer topped with a heat cured, high-performance polyester, suitable for most internal environments.
Medium to high security, suitable for Door and window security and industrial doors
HP200 plastisol colour coated finish to outside face and standard corrosion resistant finish to reverse side
76 x ≤ 10000 mm
L20/610 Roller shutters/ curtains
Roller Shutter Armourguard C2
76 x 0.71 mm curved solid 22 gauge steel lath
HP200 Plastisol Colour Coating with corrosion resistant finish to reverse side
50 x 32 x 3 mm
For standard frame up to 3000 mm width.
63 x 32 x 3 mm
For standard frame up to 5000 mm width.
100 x 32 x 3 mm
For standard frame up to 7000 mm width.
50 x 50 mm galvanized steel box section
For electrically operated shutters.
76 x 50 mm galvanized steel box section
For shutters over 200 kg.
Standard factory finish.
Polyester powder coated
Optional factory finish.
Single phase electrical
Spring loaded manual
Three phase electrical
Security key switch
|Standard product features|
76 x 0.71 mm curved solid 22 gauge steel lath.
0.91 mm bright spangle galvanized pressed steel coil casing.