Roller Shutter Alishield F6 Heavy Duty

Name: Roller Shutter Alishield F6 Heavy Duty
Brand: fX2agERHTeaMRiY866Zsok
SKU: niEWkkjg2Qv5sJJdqNd7Bm

HAG Ltd. - The Door Specialists

Roller shutter door made from heavy-duty 89 mm flat solid single skin aluminium laths - medium security.

Jump to:

+44 (0)800 072 3444 www.hag.co.uk

Application

For internal and external use in larger opening e.g. shopfront security shutters.

Description

Heavy-duty 89 mm flat solid single skin aluminium laths, for domestic and commercial applications areas requiring medium security.

Features and benefits:

Mill finish as standard, with powder coating options available.
Choice of spring loaded or electric vertical rolling operation.
Recommended maximum width of 8000 mm.

General information

Color	Aluminium Bespoke Available in 500 RAL and BS 4800 colours.
Features	Vertical rolling Medium security Shopfront security
Finish	Mill Anodized PPC Polyester powder-coated.
Material	Aluminium
Shape	Rectangular

Uniclass 2015	Pr_30_59_84_73 Roller shuttersPrimary
CAWS	L20/60 Doors L20/610 Roller shutters/ curtains

Specification data - Roller shutters Enhanced data

Opening sizes Insert requirements: maximum width up to 8000 mm.	-
Format	Solid flat aluminium lath roller shutter.
Arrangement	Vertical rolling.
Shutter curtain.	-
Lath material	Aluminium.
Profile	Heavy duty, 89 mm flat solid single skin aluminium laths. Normally 89 x 1.5 mm.
Finish and colour	Mill finish. Standard factory finish. Anodized. Polyester powder-coated. Insert requirements; available in 500 RAL and BS colours.
Frame and guides	-
Material	Galvanized steel.
Finish	Galvanized. Polyester powder-coated. Insert colour requirements below.
Colour	As shutter curtain. Colour. Polyester-powder-coated only; insert requirements, available in 500 RAL and BS colours. Not required. Galvanized finish only.
Frame accessories	None. 0.91 mm bright spangle galvanized pressed steel coil casing. Available in various different designs to suit individual circumstances; consult manufacture for details.
Operation	-
Mode Standard guide rails are 75 x 38 x 3 mm aluminium with brush seal others available on request. Electric shutters require a 50 x 50 mm steel box section (both sides) used to allow for motor unit and safety brake. A 76 x 50 mm box section will be used for shutters over 160 kg in weight (4800 x 3200 mm approximately).	Single phase electrical. A tubular motor within the barrel assembly with limit switches and thermal cut out to prevent overheating. Draw 240 V and 0.5–2.5 A, dependent upon the shutter size. Provision of a 13 A fused spur is required for installation Spring loaded manual. A counter balanced spring ensures controlled raising and lowering with a key lock in-built at the bottom of the shutter for security.
Control A manual override is included to operate the shutter in the event of a power failure. This is usually only operable from only one side.	Rocker switch. Security key switch.
Hardware	Key lock in-built at the bottom of the shutter.