Rolec EV WallPod - Tethered Lead - EV Charging Unit
Verified by manufacturer 6 days ago
WallPod 1 x 7.4kW 5m Tethered Lead - Grey (ROLEC4140G)
WallPod 1 x 7.4kW 5m Tethered Lead - Grey (ROLEC4140G)
An intelligent EV charging unit for domestic and commercial installations.
Application
Suitable for homes, garages, residential and workplaces.
Description
The WallPod is an affordable and reliable EV charging unit, providing up to 7.4 kW charging.
This OCPP-compliant unit can offer a simple plug-and-charge or pay-to-charge solution via the EV driver’s smartphone and/ or RFID card/ fob through any chosen OCPP back-office management system.
This EV charger supports dynamic load balancing and is equipped with PME fault detection, so there is no requirement for an earth rod, reducing installation costs.
Domestic users can also charge their vehicle as sustainably as possible using their solar PV or other home renewables.
Features and benefits:
- Plug and charge, mobile app or RFID-controlled charging.
- Type 2 tethered lead.
- Up to 7.4 kW charging output.
- PME fault detection (no earth rod required).
- Dynamic load balancing (CT clamp and cable included).
- Solar PV, battery storage or wind turbine integration (app-dependent feature).
- OCPP 1.6 compliant (can integrate with any back-office). MONTA is one of Rolec EV’s charge point operator partners. Other preferred back-office and mobile app partners include Fuuse, wattif, ChargePlace Scotland, and ev. energy.
- Over-the-air firmware/ software updates.
- Built-in 6 mA DC leakage protection.
- Dual tamper and breach security notifications.
- Cable lock security feature (can be permanently locked by user).
- Integrated RFID reader.
- MID-approved energy metering.
- 4G/ Wi-Fi/ Ethernet connectivity.
- IK10 impact resistant design.
- Wall or post mounted.
- OZEV grant fundable.
- Designed and manufactured in the UK.
General information
Color | Grey White Black |
Material | Polycarbonate |
Shape | Other |
Length | 367 mm |
Width | 179 mm |
Height | 142 mm |
Warranty description | Three year |
Uniclass | |
CAWS | V90/590 Equipment |
Product range |
Specification data - Electric vehicle charging points
Standards | To EN IEC 61851-1:2019, EN 61851-22:2002. |
Charging mode | 3. |
Input voltage | 230 V a.c. single-phase. |
Input current | Up to 32 A.Guidance for specification option: Chargepoint(s) will downrate if the input supply is lower than the maximum charging output. |
Rated frequency | 50/60 Hz. |
Power output | 7.4 kW. |
Outlet type | Tethered lead, with Type 2 plug to IEC 62196 series. |
Mounting | Wall-mounted.Post-mounted. |
Impact protection (minimum) | IK10. |
Ingress protection (minimum) | Enclosure IP65, socket IP54. |
Circuit protection | AC overload and fault current protection – A dedicated 30 mA Type A RCBO or equivalent protection is required at source. |
Accessories | RFID0010 RFID card.RFID0020 RFID fob.EVFP0010 WallPod galvanized steel mounting post – 1350 mm.EVFP0035 Mounting post - fits up to two chargers.EVFP0040 WallPod plate for mounting post.EVCB0020 Root mount protection barrier – 48 mm.EVCB0040 Surface mount protection barrier – 48 mm.EVPS0010 EV parking sign – A4 landscape.Guidance for specification option: Other sizes are available. EVPP0100 5 m 32 A Type 2 to Type 2 charging cable.EVPP0107 10 m 32 A Type 2 to Type 2 charging cable.Guidance for specification option: Other cables are available, including Type 1 options. EVIN0010 20A Single phase EV consumer unit with Type A RCBO.EVIN0015 40A Single phase EV consumer unit with Type A RCBO.EVRS0030 Remote wall mount for Type 2 plug holster.ACSR0125 100A up to 35 mm² screened CT clamp with 10 m cable.ACSR0520 Perific fuse protection device – 3 No. 36 mm current sensors.ACSR0530 Perific fuse protection device – 3 No. 100 mm current sensors. |
Operating temperature range | -30°C to +50°C. |
Colour | Grey. |
Communications | 4G LTE Cat-1. |
Interfaces | Mobile app. |
Sustainability data
Country of product manufacture | United Kingdom |
Material | Polycarbonate |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
 IFC | - | 1 |
Literature
EVWD-V02-R6 WallPod Data Sheet
Similar products from Rolec EV
QUBEV Smart - Tethered Lead - EV Charging Unit
QUBEV Smart - Universal Socket - EV Charging Unit
Rolec EV AutoCharge - Dual Socket - EV Charging Pedestal
Rolec EV AutoCharge - Single Socket - EV Charging Pedestal
Rolec EV BasicCharge - Dual Socket - EV Charging Pedestal
Rolec EV BasicCharge - Single Socket - EV Charging Pedestal
Rolec EV Quantum - Dual Socket - EV Charging Pedestal
Rolec EV Quantum - Quad Socket - EV Charging Pedestal
Rolec EV Quantum - Single Socket - EV Charging Pedestal
Rolec EV Quantum with Contactless Payment - Dual Socket - EV Charging Pedestal