RIW Liquid GM - Gas Resistant Coating System
Two coat, cold applied, gas resistant coating system.
Application
Specifically designed for a range of vertical and horizontal surfaces:
- Applied to walls, floors or soffits;
- As a retro applied gas proof membrane to concrete, masonry and brick substrates;
- As an alternative to sheet membranes in new construction.
Description
A single component water based compound, formulated on styrene-butadiene co-polymer. The product offers a high performance elastomeric liquid rubber membrane which only requires mixing to provide a waterproof and gas proof, liquid applied, methane and carbon dioxide barrier.
Features and benefits:
- Good chemical resistance to gasoline, sodium hydroxide, calcium chloride, de-icing salts and effluent.
- Excellent adhesion, fully bonds to porous and nonporous substrates.
- Rapid drying.
- Can be applied to damp and ‘green’ substrates.
- Flexible and non-toxic when cured.
- Can withstand temporary light trafficking.
- Easily repaired by locally over-coating.
- Can be painted, plastered or screeded over.
- Subject to normal conditions of use, the product will last the lifetime of the structure.
- Liquid applied.
- Easily applied by brush, roller or airless spray.
- Good UV resistance.
General information
Color | Black When dry. |
Material | Thixotropic liquid |
WarrantyDescriptionRIW Limited’s waterproofing products will, subject to normal service conditions, provide an effective barrier to the transmission of liquid water and water vapour for the life of the building in which they are incorporated., The products must be installed in accordance with RIW written instructions, and following installation must not be subjected to any damage or long-term UV exposure. | - |
Uniclass 2015 | |
CAWS | J30/10 Cold-applied damp-proofing J30/110 Cold-applied tanking J30/130 Cold-applied damp-proofing |
Specification data - Acrylic-based waterproof coatings Enhanced data
Colour | Black.Dries black. |
Product Reference | RIW Liquid GM |
Form | Thixotropic blue/ grey liquid. |
Application temperature | 5–35°C. |
Adhesion to concrete | > 1.1 N/mm². |
Water penetration | 3.0 bars, no penetration. |
Methane permeability | < 1.40 x 10^-12. |
Curing time | Touch dry: 30–60 minutes; Full cure: 24–48 hours. |
Digital objects
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
 IFC | IFC2X3 | 1 | 1.3 |
 Revit | Revit 2016 | 2 | 2.0 |
Literature
RIW Liquid GM