RG-80-20 Protect+ Fixed Flat Glass Single Pane Rooflight
A secure, fixed flatglass rooflight with a single pane configuration.
A secure, fixed flatglass rooflight with a single pane configuration.
Features and benefits:
- Secured by Design and Building Regulations (England) Approved Document Q compliant rooflight solution, using a laminated inner glass pane, upgraded fixings and glazing tapes to maximise security.
- Fully thermally-broken aluminium frame prevents any cold bridging, which effectively limits the risk of condensation.
- Building Regulations (E&W) Approved Document L compliant design to achieve low U-value targets.
- Good thermal performance, with total system U-values as low as 0.6 W/m²K achievable.
- Non-Fragile to Centre for Window and Cladding Technology (CWCT) Class 1 and 2 to TN66/67 and TN92.
- Weathertightness: CWCT Class A4 Air leakage, resistance to Wind Class E2400 Pa and
- Secured by Design and Part Q Compliant: Certisecure accredited, tested by Exova to determine whether it can withstand an intruder attempting to gain entry to a property via the rooflight, achieving burglar resistance class BR2 to the STS 202 standard.
- AA Fire-rated: AA Designation (National Class) or Broof (T4) European Class and Euro Class A1 non-combustible.
- Designed to be installed to a weathered builders kerb, minimum 5° pitch.
- Quick and easy to install on-site.
- Designed to be installed on roof pitches from 1°.
- Recommended minimum kerb pitch of 5° degrees to help shed water.
- Minimal framework: daylight is maximised while the visible framework is minimised.
- More daylight results in less artificial light, saving energy.
- BIM More daylight leads to enhanced well-being.
- 15 year warranty.
Designed to standard loadings of 640 N/m² (snow) and 750 N/m² (wind) and in accordance with the following Standards:
- BS 6375-1 2015+A1 2016: Weather tightness.
- BS EN 1026: Air permeability.
- BS EN 1027: Water tightness test.
- BS EN 12211: Wind resistance test.
- BS 1474: Aluminium Extrusions.
- EN 12020-1:2001: Aluminium Extrusions.
- BS EN ISO 16396-2:2017: Polyamide Thermal Break.
- BS EN 12206-1:2004: Powder Coating.
Size | As drawing Insert drawing reference. Bespoke sizes are available. Contact manufacturer for details. |
Uniclass 2015 | |
CAWS | L10/45 Rooflights L10/460 Rooflights |
Product Reference | RG-80-20 Protect+ Fixed Flat Glass Single Pane Rooflight |
Size | As drawingInsert drawing reference. Bespoke sizes are available. Contact manufacturer for details. |
Type | RectangularSquare |
Frame finish | Polyester powder coated, Black RAL 9005Polyester powder coated, Grey RAL 7016Polyester powder coated, White RAL 9010Polyester powder coated, RALInsert requirements. |
Glazing | - |
Outer pane | 6 mm HST toughened glass8 mm HST toughened glass10 mm HST toughened glass |
Cavity | 14 mm argon filled, warm edge spacer, ultraviolet resistant silicone bonded16 mm argon filled, warm edge spacer, ultraviolet resistant silicone bonded18 mm argon filled, warm edge spacer, ultraviolet resistant silicone bonded |
Inner pane | 8.8 mm annealed heat strengthened laminated glass plus soft coat Low E9.5 mm annealed heat strengthened laminated glass plus soft coat Low E10.8 mm annealed heat strengthened laminated glass plus soft coat Low E |
Additional requirements | [-] – See 'Options' and insert requirements. |
Wall abutment | - |
Type | Head vergeHead and vergeHead and both verges |
Edges | Multiple raked edgesOne raked edge |
Standard product features | Frame: Manufactured from extruded aluminium section to BS EN 12020-1. Size:
Kerb: Recommended 150 mm high, minimum 75 mm wide.
|
Product Options | Frame finish:
Consult manufacturer for details. Glazing: An extensive range of glazing options are available, please consult Roofglaze Rooflights for exact details. - Standard specification:
- Additional requirements:
|