Verified by manufacturer 7 months ago
Frame cramp - TTSFC (2 mm Stainless steel) 75–225 mm
A range of frame cramps and clasp ties in stainless steel and galvanized steel.
Typical usages are in areas where masonry is restrained to steelwork columns and in long spans of brickwork where movement joints are required by the Building Regulations for Type B in external walls.
These products are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move.
The frame cramps are available with three holes or a slot in the upstand for screwfix, bolting or shotfiring and safety end detail for embedment. Manufactured in stainless steel and galvanized steel.
The clasp ties are designed to restrain masonry to vertical structures. Three holes for screwfix, bolting or shotfiring and safety end detail for embedment. Manufactured in stainless or galvanized steel.
All TecTies Restraint and Movement Fixings are independently tested at Ceram Building Technology, a UKAS accredited laboratory NO 0013, to the requirements in BS EN 845-1:2003.
To BS EN 845-1:2003.
304 stainless steel (2.0 mm).
Non standard sizes are available to order. Consult manufacturer and insert requirements.
Compressive load capacity
Tensile load capacity
Three hole: 480 N; Slot: 530 N.
3 Hole, none v-drip.
Slot, none v-drip.
Contains Red List materials
Country of product manufacture
TTFCSV Declaration of Performance
TTHDSFCV300 Declaration of Performance
TTHDSFCV350 Declaration of Performance
TTSCT Declaration of Performance
TTSCTPE Declaration of Performance
TTSFC Declaration of Performance
TTSFCS Declaration of Performance
TTSFCV Declaration of Performance
TTSPB Declaration of Performance
TTSPE Declaration of Performance
TTSPS Declaration of Performance
restraint and movement fixings datasheet