NBS Source
List your products
Resin flooring system Elladur™ SF
Application

  • Where high build UV stable coatings are required.
  • Areas where fast turnaround but high-performance finishes are required at low temperature.
  • Medical, commercial and industrial floor areas.
  • Decorative floors.
  • Domestic areas.

Description

A high-build, polyaspartic/ polyurea type fast-cure floor coating system based on advanced materials, designed to provide a tough and durable gloss finish in a variety of thicknesses. Elladur™ SF is light stable with very good chemical resistance which can be applied to a variety of finishes and surfaces.

Features and benefits:

  • Fast curing at low temperature.
  • High build.
  • UV stable.
  • Very low odour.
  • Tough but flexible.
  • Can be applied onto a wide range of substrates.
  • Can be used in commercial and industrial applications.
  • Low volatile organic compounds (VOC).
  • CE marked to BS EN 13813.

Applications:

  • Where high build UV stable coatings are required.
  • Areas where fast turnaround but high-performance finishes are required at low temperature.
  • Medical, commercial and industrial floor areas.
  • Decorative floors.
  • Domestic areas.

General information
Material

Polyaspartic/ polyurea

Uniclass 2015
Ss_30_42_54_75 Resin flooring systemsPrimary
CAWS

M12/10 Resin flooring

M12/110 Resin flooring

Specification data - Resin flooring systems
Product Reference

Elladur™ SF

Primer

Resuprime ST

Resuseal WB Clear

Resuprime MVT

For use if no damp proof membrane is present on the concrete substrate.

Intermediate coat

Elladur SF

Seal coat

Elladur SF

Colour

Insert requirement, consult manufacturer for information.

Standard product features

Material:

Polyaspartic/ polyurea.

System thickness:

0.5–0.75 mm.

Reaction to fire (to BS EN 13501-1):

Bfl - s1.

Curing time (at 20ºC):

  • Light traffic: 4–5 hours.
  • Designed traffic: 8–10 hours.
  • Full cure traffic: 7 days.

Technical characteristics:

  • Abrasion resistance (to BS EN 13892-5): 75 mg loss/ 1000 cycles with C17 wheel.
  • Temperature resistance: Tolerant of temperatures up to 70°C.
  • UV stable: Yes.
  • FerFa class: Class 3.

Literature
Similar products from Sherwin-Williams High Performance Flooring