ReadySeal Inverted Roof System

ReadySeal Blocker Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A two-component primer that creates a barrier preventing bitumen oils from bleeding through into ReadySeal Liquid Applied Waterproofing Membrane, preventing discolouration and adhesion loss when overlaying new or old bitumen membranes.

ReadySeal Surface Primer.

Guidance for specification option:

Surface Primer is a specially formulated low viscosity fast drying primer engineered to facilitate overlap joints on partially cured ReadySeal.

ReadySeal Traffideck E4 Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A formulated 100% solids epoxy primer and sealer for concrete, steel and timber surfaces. Supplied as a kit consisting of Part A Component Traffideck E4 Primer Resin and Part B Component Traffideck E4 Primer Curative. 

ReadySeal Traffideck E5 Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A formulated 100% solids epoxy primer designed to provide a high degree of substrate sealing and adhesion between ReadySeal and concrete, steel, aluminium and timber surfaces where residual moisture within the substrate limits the use of Traffideck E4 Primer. 

Red Primer.

Guidance for specification option:

A non-flammable, rapid drying primer for use with self adhesive bituminous roofing membranes.

ReadySeal Blocker Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A two-component primer that creates a barrier preventing bitumen oils from bleeding through into ReadySeal Liquid Applied Waterproofing Membrane, preventing discolouration and adhesion loss when overlaying new or old bitumen membranes.

ReadySeal Surface Primer.

Guidance for specification option:

Surface Primer is a specially formulated low viscosity fast drying primer engineered to facilitate overlap joints on partially cured ReadySeal.

ReadySeal Traffideck E4 Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A formulated 100% solids epoxy primer and sealer for concrete, steel and timber surfaces. Supplied as a kit consisting of Part A Component Traffideck E4 Primer Resin and Part B Component Traffideck E4 Primer Curative. 

ReadySeal Traffideck E5 Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A formulated 100% solids epoxy primer designed to provide a high degree of substrate sealing and adhesion between ReadySeal and concrete, steel, aluminium and timber surfaces where residual moisture within the substrate limits the use of Traffideck E4 Primer. 

Red Primer.

Guidance for specification option:

A non-flammable, rapid drying primer for use with self adhesive bituminous roofing membranes.

Not required.

AluBase XL.

Guidance for specification option:

A self-adhesive bituminous waterproofing membrane that forms a barrier against vapour and gases.

EshaBase ALU.

Guidance for specification option:

A torch applied aluminium cored vapour barrier for bituminous roofing-systems.

Vedatop SU.

Guidance for specification option:

A self-adhesive SBS-modified base layer reinforced with a high tear resistant carrier.

Not applicable.

Torch-applied.

Self-adhesive.

ReadySeal WARM Liquid Waterproofing System.

Guidance for specification option:

ReadySeal is a BBA Certified one component silane-terminated polyether liquid applied waterproofing membrane.

• Colour: RAL 7046 Telegrey 2.
• Thickness: 2.3 mm (approximately).

ReadySeal G120 Reinforcement Fleece.

Guidance for specification option:

A reinforcing membrane for embedding into ReadySeal liquid applied waterproofing membrane to aid in the reinforcement of construction details, flashing joints, cracks and gaps.

Not Required.

ReadySeal Primer and Kiln-Dried Sand Blinding Layer.

ProTherm FOAMGLAS® INVATHERM System.

Guidance for specification option:

A non-combustible thermal insulation suitable for all types of inverted flat roofs. It offers a Euroclass A1 rating (tested to EN 13501-1) and is a highly durable product with an excellent compressive strength.

ProTherm G XPS X 300 SL.

Guidance for specification option:

A unique rigid, closed cell type Extruded polystyrene board with integral high density skin. ProTherm G inverted roof insulation utilizes infra-red blocking particles to scatter and reflect heat radiation. 

ProTherm G XPS X 500 SL.

Guidance for specification option:

A rigid, closed cell type Extruded polystyrene board with integral high density skin. ProTherm G XPS X 500 SL inverted roof insulation has a Zero Ozone Depletion Potential (ODP), a Global Warming Potential (GWP) of less than 5 and an A rating in accordance with the Green Guide to Specification. 

ProTherm G XPS X 700 SL.

Guidance for specification option:

A rigid, closed cell type Extruded polystyrene board with integral high density skin. ProTherm G XPS X 700 SL inverted roof insulation has a Zero Ozone Depletion Potential (ODP), a Global Warming Potential (GWP) of less than 5 and an A rating in accordance with the Green Guide to Specification.

ProTherm XPS X ULTRA 300 SL.

Guidance for specification option:

A unique rigid, closed cell type extruded polystyrene board with integral high density skin. ProTherm G XPS X ULTRA 300 SL Inverted Roof Insulation utilizes infra-red blocking particles to scatter and reflect heat radiation.

ProTherm Quantum Hybrid System.

Guidance for specification option:

A rigid Vacuum Insulation Panel (VIP). The VIP panel consists of a compressed fumed silica sand microporous core which is evacuated of air and moisture before being encased and sealed in a special thin, gas-tight, hybrid aluminium foil envelope. The resulting panel gives outstanding thermal conductivity, with the thinnest possible insulation solution.

ProTherm Quantum PLUS+ Vacuum Insulation.

Guidance for specification option:

A rigid Vacuum Insulation Panel (VIP). The VIP panel consists of a compressed fumed silica sand microporous core which is evacuated of air and moisture before being encased and sealed in a special thin, gas-tight, hybrid aluminium foil envelope, encapsulated in a solvent free polyurethane waterproof coating. 

Loose-Laid.

Loose-Laid with ship lapped joints.

Loose-Laid with minimum 150 mm staggered overlaps between layers.

ProTherm XPS X MK WFRL.

Guidance for specification option:

A spun bonded polyethylene geotextile based upon Tyvek® by DuPont that is waterproof and vapour permeable.

Minimum 50 mm of 20-40 mm Rounded Washed Stone Ballast.

Minimum 75 mm of 20-40 mm Rounded Washed Stone Ballast.

Minimum 50 mm Rounded Washed Stone Ballast beneath Surface Finishes.

ProScreed X Levelling Screed.

Guidance for specification option:

A two-component cold liquid applied levelling screed suitable for localised infilling and levelling of concrete structures prior to the installation of installation of the Radmat waterproofing system.

ReadySeal Pre-Wipe Kit.

Guidance for specification option:

A kit containing specially selected cloths and high performance solution in a trigger spray that removes contaminants from the surface of ReadySeal Liquid Applied Waterproofing Membrane prior to the application of ReadySeal Surface Primer.