NBS Source
I'm a manufacturer

ReadySeal Inverted Roof System

Verified by manufacturer 2 months ago

Radmat Building Products Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Liquid-applied one-component polyether waterproofing membrane, used as part of an Inverted (Warm Insulated / Protected Membrane) Roof System.

Jump to:
+44 (0)1858 410372 Website

Application

Suitable for use as a roof waterproofing membrane on warm, cold, inverted and green roofs in flat roof, pitched roof, roof terrace, podium deck, balconies, balcony and walkway applications including protected zero fall specifications.


Product uses:

  • New build and refurbishment applications.
  • Inverted roof specification on flat and zero fall roofs with limited access or pedestrian access.
  • Protected warm and cold roof specifications e.g. covered by pavers or other suitable protection on flat and zero fall roofs with limited or pedestrian access.
  • Green roof specifications (extensive) on pitched, flat and zero fall roofs with limited access.
  • Exposed warm and cold roof specifications on flat and pitched roofs with limited access.
  • Roof terraces.
  • Podium decks.
  • Protected enclosed balconies over heated space.
  • Protected insulated walkways.
  • Protected specified attachments such as projecting open balconies, projecting enclosed balconies, recessed open balconies or recessed enclosed balconies.
  • As an overlay waterproofing to existing asphalt and bitumen felt roofs (may require priming).
  • As the primary waterproofing or to upgrade roof gutters, metal or fibre cement sheeting and cement particle panels.


Suitable for use on substrates such as:

  • Concrete, cured or uncured.
  • Cementitious screeds, including latex modified.
  • Bituminous roofing membranes, including mineral surfaced.
  • Asphalt-based coatings or membranes.
  • Steel.
  • Plywood to the requirements of BS 6229:2018.
  • Oriented Strand Board (OSB) to the requirements of BS 6229:2018.
  • Glass or glassy surfaces.
  • Bright and matt ceramic surfaces.
  • Aluminium.
  • Galvanized iron sheets.
  • Copper.
  • Zinc.
  • Slate or stone coated bituminous membranes
  • Ceramic or natural stones such as marble, granite and travertine applied surfaces.

Consult manufacturer's literature for direction of application.

Description

ReadySeal is a BBA Certified one-component silane-terminated polyether liquid-applied waterproofing membrane. 


Features and benefits:

  • One component without mixing.
  • Plasticizer-, cyanate-, and solvent-free.
  • Achieves a BBA assessed service life of in excess of 30 years. BBA Certification No. 20/5797.
  • ReadySeal achieves Broof(t4) classification to BS EN 13501-5, contact manufacturer for certification information and tested roof build-ups.
  • ReadySeal achieves Broof(t4) when finished with any of the surface finishes stated in Commission Decision 2000/553/ EC (loose laid gravel with a thickness of at least 50 mm or a mass ≥ 80 kg/m² (minimum aggregate size 4 mm, maximum 32 mm), sand or cement screed to a thickness of at least 30 mm, or cast stone or mineral slabs of at least 40 mm thickness).

General information

Color

Grey

Finish

Unfinished

Material

Silane

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

2.3 mm

Warranty description

25 year

Uniclass

Ss_30_40_30_42 Liquid-applied inverted roof covering systemsPrimary

CAWS

J31/12 Inverted roof coating

J31/130 Inverted roof coating

Specification data - Liquid-applied inverted roof covering systems

Preparation

-

Horizontal work

ReadySeal Blocker Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A two-component primer that creates a barrier preventing bitumen oils from bleeding through into ReadySeal Liquid Applied Waterproofing Membrane, preventing discolouration and adhesion loss when overlaying new or old bitumen membranes.

ReadySeal Surface Primer.

Guidance for specification option:

Surface Primer is a specially formulated low viscosity fast drying primer engineered to facilitate overlap joints on partially cured ReadySeal.

ReadySeal Traffideck E4 Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A formulated 100% solids epoxy primer and sealer for concrete, steel and timber surfaces. Supplied as a kit consisting of Part A Component Traffideck E4 Primer Resin and Part B Component Traffideck E4 Primer Curative. 

ReadySeal Traffideck E5 Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A formulated 100% solids epoxy primer designed to provide a high degree of substrate sealing and adhesion between ReadySeal and concrete, steel, aluminium and timber surfaces where residual moisture within the substrate limits the use of Traffideck E4 Primer. 

Red Primer.

Guidance for specification option:

A non-flammable, rapid drying primer for use with self adhesive bituminous roofing membranes.

Skirtings and vertical work

ReadySeal Blocker Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A two-component primer that creates a barrier preventing bitumen oils from bleeding through into ReadySeal Liquid Applied Waterproofing Membrane, preventing discolouration and adhesion loss when overlaying new or old bitumen membranes.

ReadySeal Surface Primer.

Guidance for specification option:

Surface Primer is a specially formulated low viscosity fast drying primer engineered to facilitate overlap joints on partially cured ReadySeal.

ReadySeal Traffideck E4 Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A formulated 100% solids epoxy primer and sealer for concrete, steel and timber surfaces. Supplied as a kit consisting of Part A Component Traffideck E4 Primer Resin and Part B Component Traffideck E4 Primer Curative. 

ReadySeal Traffideck E5 Primer and ReadySeal Kiln-Dried Sand.

Guidance for specification option:

A formulated 100% solids epoxy primer designed to provide a high degree of substrate sealing and adhesion between ReadySeal and concrete, steel, aluminium and timber surfaces where residual moisture within the substrate limits the use of Traffideck E4 Primer. 

Red Primer.

Guidance for specification option:

A non-flammable, rapid drying primer for use with self adhesive bituminous roofing membranes.

Carrier membrane

-

Type

Not required.

AluBase XL.

Guidance for specification option:

A self-adhesive bituminous waterproofing membrane that forms a barrier against vapour and gases.

EshaBase ALU.

Guidance for specification option:

A torch applied aluminium cored vapour barrier for bituminous roofing-systems.

Vedatop SU.

Guidance for specification option:

A self-adhesive SBS-modified base layer reinforced with a high tear resistant carrier.

Fixing

Not applicable.

Torch-applied.

Self-adhesive.

Liquid-applied waterproofing

-

Type

ReadySeal WARM Liquid Waterproofing System.

Guidance for specification option:

ReadySeal is a BBA Certified one component silane-terminated polyether liquid applied waterproofing membrane.

  • Colour: RAL 7046 Telegrey 2.
  • Thickness: 2.3 mm (approximately).

Reinforcement

ReadySeal G120 Reinforcement Fleece.

Guidance for specification option:

A reinforcing membrane for embedding into ReadySeal liquid applied waterproofing membrane to aid in the reinforcement of construction details, flashing joints, cracks and gaps.

Surface treatment

Not Required.

ReadySeal Primer and Kiln-Dried Sand Blinding Layer.

Insulation

-

Type

ProTherm FOAMGLAS® INVATHERM System.

Guidance for specification option:

A non-combustible thermal insulation suitable for all types of inverted flat roofs. It offers a Euroclass A1 rating (tested to EN 13501-1) and is a highly durable product with an excellent compressive strength.

ProTherm G XPS X 300 SL.

Guidance for specification option:

A unique rigid, closed cell type Extruded polystyrene board with integral high density skin. ProTherm G inverted roof insulation utilizes infra-red blocking particles to scatter and reflect heat radiation. 

ProTherm G XPS X 500 SL.

Guidance for specification option:

A rigid, closed cell type Extruded polystyrene board with integral high density skin. ProTherm G XPS X 500 SL inverted roof insulation has a Zero Ozone Depletion Potential (ODP), a Global Warming Potential (GWP) of less than 5 and an A rating in accordance with the Green Guide to Specification. 

ProTherm G XPS X 700 SL.

Guidance for specification option:

A rigid, closed cell type Extruded polystyrene board with integral high density skin. ProTherm G XPS X 700 SL inverted roof insulation has a Zero Ozone Depletion Potential (ODP), a Global Warming Potential (GWP) of less than 5 and an A rating in accordance with the Green Guide to Specification.

ProTherm G XPS X ULTRA 300 SL.

Guidance for specification option:

A unique rigid, closed cell type extruded polystyrene board with integral high density skin. ProTherm G XPS X ULTRA 300 SL Inverted Roof Insulation utilizes infra-red blocking particles to scatter and reflect heat radiation.

ProTherm Quantum Hybrid System.

Guidance for specification option:

A rigid Vacuum Insulation Panel (VIP). The VIP panel consists of a compressed fumed silica sand microporous core which is evacuated of air and moisture before being encased and sealed in a special thin, gas-tight, hybrid aluminium foil envelope. The resulting panel gives outstanding thermal conductivity, with the thinnest possible insulation solution.

ProTherm Quantum PLUS+ Vacuum Insulation.

Guidance for specification option:

A rigid Vacuum Insulation Panel (VIP). The VIP panel consists of a compressed fumed silica sand microporous core which is evacuated of air and moisture before being encased and sealed in a special thin, gas-tight, hybrid aluminium foil envelope, encapsulated in a solvent free polyurethane waterproof coating. 

Fixing

Loose-Laid.

Loose-Laid with ship lapped joints.

Loose-Laid with minimum 150 mm staggered overlaps between layers.

Water control layer

ProTherm XPS X MK WFRL.

Guidance for specification option:

A spun bonded polyethylene geotextile based upon Tyvek® by DuPont that is waterproof and vapour permeable.

Ballast

Minimum 50 mm of 20-40 mm Rounded Washed Stone Ballast.

Minimum 75 mm of 20-40 mm Rounded Washed Stone Ballast.

Minimum 50 mm Rounded Washed Stone Ballast beneath Surface Finishes.

System accessories

ProScreed X Levelling Screed.

Guidance for specification option:

A two-component cold liquid applied levelling screed suitable for localised infilling and levelling of concrete structures prior to the installation of installation of the Radmat waterproofing system.

ReadySeal Pre-Wipe Kit.

Guidance for specification option:

A kit containing specially selected cloths and high performance solution in a trigger spray that removes contaminants from the surface of ReadySeal Liquid Applied Waterproofing Membrane prior to the application of ReadySeal Surface Primer.

Sustainability data

Contains Red List materials

Yes

Country of material origin

Europe

Country of product manufacture

Europe

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

20/5797 ReadySeal BBA Certificate

Literature

AluBase XL PDS Nov 2019

AluBase XL PDS Nov 2019

ProTherm XPS X MK WFRL PDS

ProTherm XPS X MK WFRL PDS

PDS - ReadySeal Surface Primer

PDS - ReadySeal Surface Primer

PDS - ReadySeal Blocker Primer

PDS - ReadySeal Blocker Primer

PDS - ReadySeal

PDS - ReadySeal

Similar products from Radmat Building Products Ltd

ParaFlex FD Inverted Roof System

ParaFlex FD Inverted Roof System

PermaQuik PQ6100 Inverted Roof System

PermaQuik PQ6100 Inverted Roof System