ReadySeal Cold Roof System
Verified by manufacturer 5 months ago
EPD
Certificate type
Liquid-applied one-component polyether waterproofing membrane, used as part of a Cold (un-insulated) Roof System
Application
Suitable for use as a roof waterproofing membrane on warm, cold, inverted and green roofs in flat roof, pitched roof, roof terrace, podium deck, balconies, balcony and walkway applications including protected zero fall specifications.
Product uses:
- New build and refurbishment applications.
- Inverted roof specification on flat and zero fall roofs with limited access or pedestrian access.
- Protected warm and cold roof specifications e.g. covered by pavers or other suitable protection on flat and zero fall roofs with limited or pedestrian access.
- Green roof specifications (extensive) on pitched, flat and zero fall roofs with limited access.
- Exposed warm and cold roof specifications on flat and pitched roofs with limited access.
- Roof terraces.
- Podium decks.
- Protected enclosed balconies over heated space.
- Protected insulated walkways.
- Protected specified attachments such as projecting open balconies, projecting enclosed balconies, recessed open balconies or recessed enclosed balconies.
- As an overlay waterproofing to existing asphalt and bitumen felt roofs (may require priming).
- As the primary waterproofing or to upgrade roof gutters, metal or fibre cement sheeting and cement particle panels.
Suitable for use on substrates such as:
- Concrete, cured or uncured.
- Cementitious screeds, including latex modified.
- Bituminous roofing membranes, including mineral surfaced.
- Asphalt-based coatings or membranes.
- Steel.
- Plywood to the requirements of BS 6229:2018.
- Oriented Strand Board (OSB) to the requirements of BS 6229:2018.
- Glass or glassy surfaces.
- Bright and matt ceramic surfaces.
- Aluminium.
- Galvanized iron sheets.
- Copper.
- Zinc.
- Slate or stone coated bituminous membranes
- Ceramic or natural stones such as marble, granite and travertine applied surfaces.
Consult manufacturer's literature for direction of application.
Description
ReadySeal is a BBA Certified one-component silane-terminated polyether liquid-applied waterproofing membrane.
Features and benefits:
- One component without mixing.
- Plasticizer-, cyanate-, and solvent-free.
- Achieves a BBA assessed service life of in excess of 30 years.
- ReadySeal achieves Broof(t4) classification to BS EN 13501-5, contact manufacturer for certification information and tested roof build-ups.
- ReadySeal achieves Broof(t4) when finished with any of the surface finishes stated in Commission Decision 2000/553/ EC (loose laid gravel with a thickness of at least 50 mm or a mass ≥ 80 kg/m² (minimum aggregate size 4 mm, maximum 32 mm), sand or cement screed to a thickness of at least 30 mm, or cast stone or mineral slabs of at least 40 mm thickness).
- Delivery: 20 kg tin, 14.25 L, 27 per pallet.
- Storage and shelf life: Store in dry conditions in original packaging at temperatures between +5°C and +30°C. Protect from direct sunlight and frost. In the original closed package ReadySeal will be in good condition for at least one year.
General information
Color | Grey |
Finish | Anti-microbial |
Material | Silane |
Shape | Formless |
Length | Bespoke |
Width | Bespoke |
Height | 2.3 mm |
Warranty description | 25 year |
Uniclass | |
CAWS | J31/5 Cold deck roof coating J31/110 Cold deck roof coating |
Specification data - Liquid-applied cold roof covering systems
Preparation | |
Horizontal work | ReadySeal Blocker Primer & ReadySeal Kiln-Dried Sand.Guidance for specification option: A two-component primer that creates a barrier preventing bitumen oils from bleeding through into ReadySeal Liquid Applied Waterproofing Membrane, preventing discolouration and adhesion loss when overlaying new or old bitumen membranes. ReadySeal Pre-wipe Kit.Guidance for specification option: Pre-wipe Kit contains specially selected cloths and high performance solution in a trigger spray. ReadySeal Surface Primer.Guidance for specification option: Surface Primer is a specially formulated low viscosity fast drying primer engineered to facilitate overlap joints on partially cured ReadySeal. ReadySeal Traffideck E4 Primer and ReadySeal Kiln-Dried Sand.Guidance for specification option: A formulated 100% solids epoxy primer and sealer for concrete, steel and timber surfaces. Supplied as a kit consisting of Part A Component Traffideck E4 Primer Resin and Part B Component Traffideck E4 Primer Curative. ReadySeal Traffideck E5 Primer and ReadySeal Kiln-Dried Sand.Guidance for specification option: A formulated 100% solids epoxy primer designed to provide a high degree of substrate sealing and adhesion between ReadySeal and concrete, steel, aluminium and timber surfaces where residual moisture within the substrate limits the use of Traffideck E4 Primer. Red Primer.Guidance for specification option: A non-flammable, rapid drying primer for use with self adhesive bituminous roofing membranes. |
Skirtings and vertical work | ReadySeal Blocker Primer & ReadySeal Kiln-Dried Sand.Guidance for specification option: A two-component primer that creates a barrier preventing bitumen oils from bleeding through into ReadySeal Liquid Applied Waterproofing Membrane, preventing discolouration and adhesion loss when overlaying new or old bitumen membranes. ReadySeal Pre-wipe Kit.Guidance for specification option: Pre-wipe Kit contains specially selected cloths and high performance solution in a trigger spray. ReadySeal Surface Primer.Guidance for specification option: Surface Primer is a specially formulated low viscosity fast drying primer engineered to facilitate overlap joints on partially cured ReadySeal. ReadySeal Traffideck E4 Primer and ReadySeal Kiln-Dried Sand.Guidance for specification option: A formulated 100% solids epoxy primer and sealer for concrete, steel and timber surfaces. Supplied as a kit consisting of Part A Component Traffideck E4 Primer Resin and Part B Component Traffideck E4 Primer Curative. ReadySeal Traffideck E5 Primer and ReadySeal Kiln-Dried Sand.Guidance for specification option: A formulated 100% solids epoxy primer designed to provide a high degree of substrate sealing and adhesion between ReadySeal and concrete, steel, aluminium and timber surfaces where residual moisture within the substrate limits the use of Traffideck E4 Primer. Red Primer.Guidance for specification option: A non-flammable, rapid drying primer for use with self adhesive bituminous roofing membranes. |
Carrier membrane | |
Type | Not required.AluBase XL.Guidance for specification option: A self-adhesive bituminous waterproofing membrane that forms a barrier against vapour and gases. EshaBase ALU.Guidance for specification option: A torch applied aluminium cored vapour barrier for bituminous roofing-systems. Vedatop SU.Guidance for specification option: A self-adhesive SBS-modified base layer reinforced with a high tear resistant carrier. |
Attachment | Not applicable.Self-adhesive.Torch-on. |
Liquid-applied waterproofing | |
Type | ReadySeal COLD Cold-Applied Liquid Waterproofing System.Guidance for specification option: A BBA Certified one component silane-terminated polyether liquid applied waterproofing membrane. |
Reinforcement | Not required.ReadySeal G120 Reinforcement Fleece.Guidance for specification option: A reinforcing membrane for embedding into ReadySeal Liquid Applied Waterproofing Membrane to aid in the reinforcement of construction details, flashing joints, cracks and gaps. |
Surface protection | ProScreed X Levelling Screed.Guidance for specification option: PermaQuik ProScreed X is a two-component cold liquid applied resin suitable for localized infilling and levelling of concrete structures prior to the installation of Zero Falls PermaQuik waterproofing system. |
System accessories | ProScreed X Levelling Screed.Guidance for specification option: A two-component cold liquid applied levelling screed suitable for localised infilling and levelling of concrete structures prior to the installation of installation of the Radmat waterproofing system. ReadySeal Pre-Wipe Kit.Guidance for specification option: A kit containing specially selected cloths and high performance solution in a trigger spray that removes contaminants from the surface of ReadySeal Liquid Applied Waterproofing Membrane prior to the application of ReadySeal Surface Primer. ReadySeal Surface Primer.Guidance for specification option: A specially formulated low viscosity fast drying primer engineered to facilitate overlap joints on partially cured ReadySeal liquid applied waterproofing membrane. It is also used for full priming of cured ReadySeal prior to repairing any damage or applying a surface finish. |
Sustainability data
Contains Red List materials | Yes |
Country of material origin | Europe |
Country of product manufacture | Europe |
Material | Silane |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |
Third party certifications
Third party certifications
EPD
Sector EPD - Products based on polyurethane or silane-modified polymer, group 4
Literature
AluBase XL PDS Nov 2019
EshaBase Alu Product Data Sheet
PDS - ReadySeal
PDS - ReadySeal Blocker Primer
PDS - ReadySeal Pre-wipe Kit
PDS - ReadySeal Surface Primer
ProScreed X Levelling Screed Product Data Sheet
Red Primer PDS
Similar products from Radmat Building Products Ltd
ParaFlex FD
ParaFlex FD Cold Roof System
ParaFlex Topseigel
PermaQuik PQ6100 Cold Deck Roof System