RAVATHERM XPS X 700 SL
BSI Kitemark
Certificate type
Extruded polystyrene (XPS) thermal insulation designed for very high loadbearing floors such as cold stores and aircraft hangars.
Suitable for load-bearing industrial floors, base slabs or high-load rooftop car parks.
Ravatherm XPS X 700 SL closed-cell polystyrene foam thermal insulation, with its excellent thermal insulation capability, high compressive strength and resistance to moisture, can be safely used in locations where good thermal insulation capability is only one of many complex requirements.
Features and benefits:
- Permanently high thermal insulation performance.
- Water and frost resistance.
- High compressive strength.
- High flexible rigidity.
- High vapor diffusion resistance.
Application:
Suitable for load-bearing industrial floors, base slabs or high-load rooftop car parks.
| Finish | Skin |
| Color | Steel grey |
| Material | Extruded polystyrene |
| Shape | Rectangular |
| Size | 1250 x 50 x 600 mm1250 x 100 x 600 mm |
| Uniclass 2015 |
| Product Reference | RAVATHERM XPS X 700 SLPrimarily used heavy duty flooring. |
| Third party product certification | CE 13164 |
| Fire performance | Euroclass ETo BS EN 13501-1. Products contain an ecologically safe flame-retardant additive. |
| Compressive strength (minimum) at 10% compression | 700 kPaTo EN 826. To plan the reinforcement steel requirements of floor slab used as a load-distribution structure over the thermal insulation layer, please consult a structural engineer. |
| Compressive creep (design load) maximum 2% deflection after 50 years | 250 kPaTo EN 1606. |
| Thermal conductivity (maximum) | <60 mm - 0.031 W/m·KTypical thickness 50 mm to EN 13164. ≥60 mm - 0.032 W/m·KTypical thickness ranges between 80–205 mm to EN 13164. |
| Thickness | Insert requirements. 50 or 100 mm thickness dependent on required U-value and application. |
| Face Size (length x width) | 1250 x 600 mmThe maximum installation depth of the thermal insulation is determined by the load: the horizontal pressure must not exceed the compressive strength of the boards, taking into account the value of the permanent load. |
| Recycled content | Ravatherm XPS X uses carbon dioxide as a blowing agent, which gives it an ozone-depleting potential (ODP) of zero and a Global Warming Potential (GWP) of less than five |
| Facing | SmoothSmooth surface skin (extrusion skin). PE film separating and sliding layer between the thermal insulation and the concrete screed for installation on floor applications. |
| Edges | Ship lapA grooved edge allowing boards to overlap, minimizing gaps. |
| Temperature range: | -50–75°C maximumProvides the permanent application temperature of Ravatherm XPS X products. At higher temperatures, the boards will start to soften and suffer permanent deformation. |
| Standard product features | Colour: Grey. Features: Environmental friendly and a cost efficient solution. Finish: Smooth surface skin (extrusion skin). Material: Homogeneous, closed-cell material structure comprised of extruded polystyrene (XPS), a rigid form of insulation. Shape: Rectangular boards. Size: 1250 x 600 mm - Overall length x width per board. |
| Recycled content | Ravatherm XPS X uses carbon dioxide as a blowing agent, which gives it an ozone-depleting potential (ODP) of zero and a Global Warming Potential (GWP) of less than five |
| Platform | Compatible | Version | Certified to |
|---|---|---|---|
 IFC | - | 7 | 2.1 |
 Revit | - | 6 | 2.1 |
- BS EN 13501-1 - Fire classification of construction products and building elements. Classification using data from reaction to fire tests : Once the insulation is placed in the inverted roof, if the finishing used is that covered by the European Commission Decision EC 2000/553/EC, the designation of the roof is Broof(t4) hence complying with Requirement B4 (External Fire spread) of Approved Document B of the Building Regulations
- BS EN 826:2013 - Thermal insulating products for building applications. Determination of compression behaviour
- BS EN 13164:2008 - Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS)