NBS Source
I'm a manufacturer
Compare variants

Radiator Pipe Guide and Seals

Verified by manufacturer 7 months ago

GRS Radiator Pipe Guide and Seal

Manthorpe Building Products Ltd Variant:

Radiator pipe guides with seals, designed to help minimize air leakage.

Jump to:
+44 (0)1773 303000 Website

Application

For use with 10 mm flexible plastic pipework to create an air leakage barrier at the point where radiator pipes meet and pass through walls. 

Description

Designed specifically for use with 10 mm flexible plastic pipework, the Type GRS and GRS-FF guide and seal helps builders to achieve the air leakage requirements of the revised Part L Regulations and reducing heat loss where plastic pipes pass through plasterboard walls. The units will also help prevent kinking and chafing of pipework.


Features and benefits:

  • Inexpensive, quick and easy to fit, the radiator pipe guide and seals provide a highly effective air leakage barrier, conserving energy and reducing householder’s fuel costs.
  • For builders, they are a simple way of complying with the Revised Part L Regulations regarding airtightness.
  • The face fix version (GFS-FF), is fitted to the external face of the blockwork or dry lining, which makes it slightly more versatile than the GRS, with different pipe routing options.


Product options:

- GRS:

  • Material: manufactured from high-impact polystyrene (HIPS) with a foam seal.
  • Colour: White.
  • Pipe clamp – preventing chafing of pipes.
  • Skim-bead – provides guide for plastering up to.
  • 80 mm radius pipe guide – eliminates kinks and helps prevent pipe sag.
  • An air-tight, twin shot TPE gasket prevents air leakage.
  • Four secure fixing points allow accurate installation.

- GRS-FF:

  • Manufactured from white polypropylene with an integral TPE perimeter seal and pipe grommets.
  • Three secure fixing points.
  • Rubber grommets hold pipe and prevent air leakage.
  • Flush-fit design.
  • Works in all directions.

- GRS-SE:

  • Manufactured from white polypropylene with an integral TPE perimeter seal and pipe grommets.
  • Two fixing points.
  • Rubber grommet to hold pipe and prevent air loss.
  • Convex design helps to ensure an airtight seal when fitted.
  • Can be orientated in any direction to suit the exit of the pipe.

General information

Color

White

Material

Polystyrene

Guidance for specification option:

High-impact polystyrene (HIPS).

Polypropylene

CAWS

T90/410 Thermoplastics pipelines

Specification data

Material:

High-impact polystyrene (HIPS).

FinishColor

White.

Fixing holes

4.