NBS Source
List your products
Rada V12 130 Exposed Shower Valve

Rada V12 130 Exposed Shower Valve

Third party certifications:
  • QA Certificate

    QA Certificate

    Certificate type

Rada

Surface mounted thermostatic shower valve.

Jump to:
+44 (0)844 571 1777 www.radacontrols.com
Description

Surface mounted thermostatic shower valve certified to TMV3 performance. Sequential single lever operation from cold through to warm. Includes service-free cartridge, filters and optional flow regulators.

Features:

  • TMV3 approved thermostatic shower valve.
  • Single sequential operation from off through cold to warm.
  • Light touch control complemented by easy to understand graphics to address the needs of all users irrespective of age or ability.
  • Robust construction to withstand heavy usage in the commercial environment.
  • Optional 6 L/min flow regulator for increased water savings. A 9 L/min flow regulator is also supplied.
  • Easy access to filters for servicing.
  • Straight forward retrofit for installations with 130 mm inlet centres e.g. Meynell V8.

Approvals:

  • Buildcert TMV3 Scheme Approved.
  • HP-S High Pressure Showering.
  • LP-S Low Pressure Showering.
  • WRAS listed (Water regulations advisory scheme).
  • Designed, manufactured and supported in accordance with accredited BS EN ISO 9001:2008 Quality management systems and BS EN ISO 14001:2004 Environmental Management Systems.

General information
Features

Sequential single lever, service-free cartridge, filters

Size

0.0

WarrantyDescription

Two years parts and labour as standard; Extended to five years parts and labour if commissioned by Rada. UK only

Uniclass 2015
Pr_40_20_87_81 Shower thermostatic water supply setsPrimary
CAWS

N13/375 Shower units

N13/40 Shower units

S90/67 Thermostatic mixing valves

S90/680 Thermostatic mixing valves

Specification data - Shower thermostatic water supply sets
Product Reference

Rada V12 130 Exposed Thermostatic Shower Valve (1.1651.003)

Standard product features

Connections:

  • Inlets: 15 mm compression.
  • Outlet: ½” BSP Flat Face/ 15 mm compression.
  • Standard connections are: hot- left, cold- right, outlet- bottom or top.
  • Suitable for rising, falling or rear entry supplies. Reversed supplies can be accommodated by rotating the mixer 180°.

Operation:

The Rada V12 is operated via a single sequential control which when rotated initially opens the valve, then increases temperature from cold to a pre-set maximum.

Temperature Range:

  • Temperature range from cold to preset maximum.
  • The maximum temperature that can be selected is factory set at approximately 43°C, but this can be reset on site if required (by an authorised person).
  • Thermostatic control ± 1°C within the range 35–45°C (assuming supplies of 15–65°C hot at nominally equal pressures).

Note: In the event of loss of either supply, the valve will automatically shut off. Minimum temperature differential of blend to either supply 10°C.

Supply:

  • Cold water temperature range 5–25°C.
  • Hot water temperature range (recommended) 60–65°C.
  • Maximum hot water temperature 85°C.

Note: For reasons of general safety, hot water storage temperatures should be maintained at between 60–65°C where serving ablutionary applications. The mixing valve can accept temporary excursions above 85°C without damage, however operation at such elevated temperatures is not recommended.

Pressure:

Dynamic supply pressure (Running):

  • Minimum: 0.1 Bar.
  • Maximum: 5 Bar.
  • Maximum Static: 10 Bar.
  • Minimum flow rate: 3 L/min.
  • Maximum flow rate: 40 L/min.

Materials:

  • Body and Elbows: Chrome Plated Polished Brass.
  • Lever: Chrome Plated Zinc Die Casting.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2016 4 1.3
IFC
- 5 1.3
AECOsim
- 1.0
Download now from NBS National BIM Library
Third party certifications
  • Buildcert: TMV3 Scheme Approved
  • WRAS listed (Water Regulations advisory scheme).
Similar products from Rada