NBS Source
List your products
Description

TMV3 approved panel mounted, thermostatic mixer tap featuring Insutech+ technology. Long lever sequential operation, supplied complete with service-free cartridge, check valves, strainers and isolating ball valves.

Features:

  • Available in either panel or deck mounted configurations.
  • Compliant with UK Healthcare Guidelines.
  • Safe-to-touch. Features Insutech + technology to reduce surface temperature to a safe level
  • Innovative design minimises water retention in the body and spout, to contribute to improved bacterial control.
  • Integral water isolating ball valves.
  • Easy access to filters to support routine servicing and educe down time.
  • Sequential long lever control. Simple to use under hospital protocols.
  • Easy clean for improved hygiene.

Approvals:

  • Buildcert TMV3 Scheme Approved.
  • HP-S High Pressure Showering.
  • LP-S Low Pressure Showering.
  • Complies with the technical requirements of BS 7942 for the same designations.
  • Designed to comply with European Standards EN 1111 and EN 1287.
  • WRAS listed (Water regulations advisory scheme).
  • Designed, manufactured and supported in accordance with accredited BS EN ISO 9001:2008 Quality management systems and BS EN ISO 14001:2004 Environmental Management Systems.

General information
Features

Features Insutech+ technology, service-free cartridge, check valves, strainers, isolating ball valves

Finish

Chrome

Size

0.0

WarrantyDescription

Two years parts and labour as standard; Extended to five years parts and labour if commissioned by Rada. UK only

Uniclass 2015
Pr_40_20_87_99 Washbasin thermostatic water supply setsPrimary
Specification data - Washbasin thermostatic water supply sets
Product Reference

Rada Safetherm Thermostatic Clinical Tap (1.1704.001)

Standard product features

Connections:

  • Inlets: 15 mm Compression or ½” BSP Flat Face.
  • Standard connections are: hot - left, cold - right. The inlet connectors are fixed at 200 mm centres.

Operation:

The Rada Safetherm has a single sequential control which when rotated initially opens the valve, then increases temperature from cold to a pre-set maximum. A 175 mm lever allows for simple wrist or elbow operation.

Temperature Range:

  • Factory Pre-set (Blend): 41°C.
  • Optimum Thermostatic Control Range: 35–43°C (achieved with supplies of 15–65°C hot and nominally equal pressures).
  • Recommended Hot Supply: 60–65°C.

Note: The mixing valve can operate at higher temperatures for short periods without damage; however this could detrimentally affect thermostatic performance. For safety and performance reasons it is recommended that the maximum hot water temperature is limited to 65°C. Minimum recommended differential between hot supply and outlet temperature: 12°C.

Pressures/ Flow Rate:

  • Maximum Static Pressure: 10 Bar.
  • Maximum Maintained Pressure: 5 Bar.

Materials:

  • Body: Chrome Plated Bass.
  • Lever: Chrome Plated Zinc Casting.

Digital objects
PlatformCompatibleVersionCertified to
AECOsim
- 1.0
IFC
- 4 1.3
Revit
Revit 2016 4 1.3
Download now from NBS National BIM Library
Literature
Similar products from Rada