Rada 126 Mono-Control System

Operation:

• When the sensor is activated, a signal is sent to the Rada mono-control module which initiates a delay, after which the solenoid valve opens, allowing water to flow to the outlet.

• The duration of the flow can be pre-set via the mono-control module.

• The ½" solenoid valve is supplied complete with an integral isolator and filter.

Flush timing:

• The system provides a flush duration which can be set for 6, 9, 11 or 13 seconds.

• This will operate after a flush delay of either, 30 seconds, 1 minute, 2 minutes or 3 minutes.

• These settings can be adjusted via the integral timing dial.

• A duty flush is incorporated, every 24 hours after use.

Sensor range:

• Minimum: 0.5 m.

• Maximum: 2.5 m.

Materials:

• Ceiling sensor: ABS cover - polycarbonate.

• Solenoid valve: Fibreglass polyamide body.

Pressure:

• Solenoid valve: 0.20 - 10 bar.

Electrical:

• Sensor protection class: Electronic module IP55.

• Supply voltage: 12V AC + 10% 50/60Hz, via Rada Universal 12V AC transformer (not included).

• Power consumption: 6 VA.

Operating temperatures:

• Ambient temperature range: 5–40°C.

• Maximum humidity: 80%.

Accessories:

• Rada Universal 12V AC Transformer.