NBS Source
I'm a manufacturer
Compare variants

Proteus Pro-Cold System - Waterproofing Liquid Applied System

Verified by manufacturer 4 days ago

Built-up roof (warm exposed)

Proteus Waterproofing Variant:
Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Liquid-applied roof waterproofing system for use on built-up roof (warm exposed), cold roof (exposed), overlay, coating to metal roof sheets and coating to gutters.

Jump to:
+44 (0)1268 777871 Website

Application

Suitable for:

Built-up roof (warm exposed), cold roof (exposed), overlay, coating to metal roof sheets and coating to gutters.


Suitable substrates:

  • Existing mastic asphalt.
  • Existing bituminous membrane.
  • Existing PVC/TPO single ply membrane.
  • Existing EPDM membrane.
  • Existing GRP.
  • Structural concrete.
  • Plywood deck.
  • Cross laminated timber deck.
  • Metal roof sheets.
  • Metal gutters.
  • Brickwork.
  • Blockwork.
  • Porous surface.

Some surfaces may require priming or sacrificial layers.

Description

A high performance, cold applied, seamless, elastomeric, liquid applied membrane system for waterproofing exposed and protected flat and pitched roof areas.


It is a single pack, moisture triggered polyurethane, quickly resistant to rain at application stage and can cure under water without gassing or foaming. It is designed to provide a monolithic, waterproof, liquid applied membrane that does not brittle with age.


The excellent and long lasting performance of Proteus Pro-Cold® liquid applied membrane is provided by the combination of the Pro-Force reinforcement (specified separately) and the Proteus Pro-Cold® polyurethane characteristics.


Features and benefits:

  • European fire classification of BROOF(t4).
  • Cold installed, elastomeric and seamless waterproofing membrane – no lap-joints.
  • Moisture triggered curing - Shower proof at 30 minutes.
  • Low/high temperature application range of 2–35°C.
  • Awkward details easily completed.
  • UV stable, resistant to diluted acids and alkalis, oil, petrol, diesel, vegetable oils and fruit acids.
  • Proteus Pro-Cold® systems can be overcoated at the end of their designed life to extend the service life of the Proteus Pro-Cold® liquid applied membrane, reducing lifecycle costs and landfill waste.
  • BBA Certified 30 years - Certificate No. 22-6497.

General information

Color

Grey

Guidance for specification option:

  • RAL7015- Slate Grey.
  • RAL7038- Light Grey.

Finish

Smooth

Textured

Material

Polyurethane (PUR)

Shape

Formless

Warranty description

30 year

Guidance for specification option:

Proteus guarantees are available, subject to the current terms and conditions which are available separately on request.

Uniclass

Ss_30_40_30_43 Liquid-applied warm roof covering systemsPrimary

CAWS

J31/5 Cold deck roof coating

J31/120 Warm deck roof coating

J31/110 Cold deck roof coating

J31/10 Warm deck roof coating

Specification data - Liquid-applied warm roof covering systems

Preparation

-

Horizontal work

Pro-Prime® SA.

Guidance for specification option:

  • For best results ensure that surfaces to be primed are free from oil or dust.
  • Apply Pro-Prime® SA by roller or brush at a rate min of 5 m²/lit (the green colour will indicate the treated area); refill roller if ‘cobwebbing’ appears. Avoid puddling of the primer.
  • Drying time will be affected by surface porosity, film thickness and temperature and can vary between 40-90 minutes.
  • Pro-Prime® SA will remain tacky even after dry.
  • To test, use the back of a glove or dry object to press into the primer and remove; there should be no transfer of primer when the primer is ready. It is essential that sufficient drying time is allowed as any entrapment of solvent will result in blistering/ delamination.
  • Only prime areas that will be covered with Pro-Carrier SA within 2-3 hours. Avoid walking over areas already primed.


As per manufacturers instructions.

Skirtings and vertical work

As horizontal work.

Pro-Epoxy Primer.

Pro-Sealer WB.

Air and vapour control layer

Pro-Vapour/ Carrier Membrane SA.

Guidance for specification option:

Fixed using Pro-Prime® SA.

Insulation

-

Type

Proteus Pro-Therm Cellular Glass.

Proteus Pro-Therm HP PIR Plus.

Proteus Pro-Therm HP PIR.

Proteus Pro-Therm Mineral Wool.

Proteus Pro-Therm PIR.

Proteus Pro-Therm VIP.

Fixing

Proteus Pro-Bond Foaming Adhesive.

Carrier membrane

-

Type

Pro-Vapour/ Carrier Membrane SA.

Fixing

Pro-Prime® SA.

Liquid-applied waterproofing

-

Type

Proteus Pro-Cold®, RAL 7015 - Slate Grey.

Proteus Pro-Cold®, RAL 7038 - Light Grey.

Manufacturer guidance

Proteus Pro-Cold® is a high performance, cold applied, seamless, elastomeric, liquid applied membrane for

waterproofing exposed and protected flat and pitched roof areas.

Reinforcement

Pro-Force.

Surface treatment

None.

Anti-slip walkway.

Reaction to fire classification

BROOF(t4).

Third-party certification

BBA certificate.

Sustainability data

Contains Red List materials

No

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

BBA - Proteus Pro-Cold®

Literature

Product Data Sheet - Proteus Pro-Cold®

Product Data Sheet - Proteus Pro-Cold®

Material Safety Data Sheet - Proteus Pro-Cold®

Material Safety Data Sheet - Proteus Pro-Cold®

Case studies

Case Study - Proteus Pro-Cold® - BMI The Blackheath Hospital

Case Study - Proteus Pro-Cold® - BMI The Blackheath Hospital

Case Study - Proteus Pro-Cold® - The Gatehouse Whaddon

Case Study - Proteus Pro-Cold® - The Gatehouse Whaddon

© 2024 NBS Enterprises Ltd. All rights reserved.