NBS Source
I'm a manufacturer

Proteus Cold Melt® DPM Primer – Green Concrete

Verified by manufacturer 1 month ago

Proteus Waterproofing Third party certifications:
  • BRE Certificate

    BRE Certificate

    Certificate type

  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • ISO 14001 Environmental Management Systems

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

A non-pigmented epoxy/ amine resin DPM system

Jump to:
+44 (0)1268 777871 Website

Application

Designed for use as a coating over cementitious surfaces which possess high levels of residual moisture or have not been protected by an underlying moisture barrier.

Description

Cold Melt® DPM is a two component, solvent free, damp proof membrane designed for use as a coating over cementitious surfaces which possess high levels of residual moisture or have not been protected by an underlying moisture barrier.


Features and benefits:

  • Allows construction roofing programme to accelerate and provide earlier access to other internal and external trades.
  • Can be used as a temporary waterproofing solution.
  • Tested with Proteus Hot Melt and Proteus Cold Melt systems.
  • Excellent adhesion to prepared substrates (9-11 N/mm).
  • High water vapour permeability (2.6/m²/mm/day).
  • Wide in-service temperatures range (-20 to +60°C).
  • Proven long term hydrolytic stability when used as a moisture repellent membrane.
  • Excellent stability under water/ saline immersion.
  • Lap shear bond strength to A.S.T.M. 16-18 N/mm.

General information

Color

Yellow

Finish

Gloss

Material

Resin

Guidance for specification option:

A non-pigmented epoxy/amine resin.

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_35_31_66_57 Non-bituminous primersPrimary

CAWS

J41/320 Primer

J31/310 Primer

Specification data - Non-bituminous primers

Composition

A non-pigmented epoxy/ amine resin DPM system.

Density

1.2 kg/L.

Solids content

100% (by volume), 100% (by weight).

Layer thickness

When applied as a single coat: 200–300 µm. When applied as a two-coat system: 480–500 µm composite build.

Type

DPM resin.

Coverage

Minimum 0.4 kilos/m².

Sustainability data

Material

Resin

Guidance for specification option:

A non-pigmented epoxy/amine resin.

Third party certifications

Third party certifications

BRE Certificate

BRE Certificate

BRE - Cold Melt® DPM - Adhesive Bond Strength Test

BBA Agrément Certificate

BBA Agrément Certificate

BBA - Proteus Cold Melt®

ISO 14001 Environmental Management Systems

ISO 14001 Environmental Management Systems

ISO 14001 Environmental Management Systems

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001 Quality Management

Literature

Material Safety Data Sheet - Proteus Cold Melt® DPM Primer (Hardener)

Material Safety Data Sheet - Proteus Cold Melt® DPM Primer (Hardener)

Material Safety Data Sheet - Proteus Cold Melt® DPM Primer (Resin)

Material Safety Data Sheet - Proteus Cold Melt® DPM Primer (Resin)

Product Data Sheet - Proteus Cold Melt® DPM Primer

Product Data Sheet - Proteus Cold Melt® DPM Primer

Manual - Proteus Cold Melt®

Manual - Proteus Cold Melt®

Case studies

Case Study - Proteus Cold Melt® - Battersea Cats & Dogs Home

Case Study - Proteus Cold Melt® - Battersea Cats & Dogs Home

Case Study - Proteus Cold Melt® & Proteus Pro-Living® - Cygnet Hospital

Case Study - Proteus Cold Melt® & Proteus Pro-Living® - Cygnet Hospital

Case Study - Proteus Cold Melt® & Proteus Pro-Living® - KBS Builders Ltd, Greenwich

Case Study - Proteus Cold Melt® & Proteus Pro-Living® - KBS Builders Ltd, Greenwich

Case Study - Proteus Hot Melt® and Proteus Cold Melt® - Nashmills

Case Study - Proteus Hot Melt® and Proteus Cold Melt® - Nashmills

Similar products from Proteus Waterproofing

Pro-Epoxy Primer

Pro-Epoxy Primer

Pro-Reactivation Primer

Pro-Reactivation Primer

Proteus Pro-Prime® SA

Proteus Pro-Prime® SA

Proteus Pro-Sealer WB

Proteus Pro-Sealer WB