Protec Evolve Warm Roof System - Low-odour, cold-applied liquid membrane
Verified by manufacturer 3 months ago
Warm Roof PIR (New Build)
Warm Roof PIR (New Build)
BBA Agrément Certificate
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
ISO 9001 Quality Management
Certificate type
EPD
Certificate type
A range of warm roof systems with a low-odour, cold-applied liquid membrane.
Application
Suitable for flat and pitched roofs, balconies, terraces and walkway applications.
Description
Protec Evolve is an advanced low-odour and highly durable liquid-applied membrane suitable for a range of applications, including sensitive projects such as hospitals and schools. The fast-curing, fully-reinforced cold liquid-applied membrane offers an extended lifespan with a market-leading 30-year durability rating from the BBA.
RapidCure technology utilizes catalyst, accelerators and inhibitors allowing full control over cure times across a wide range of temperatures all year round. The seamless Protec Evolve membrane features the optimum combination of flexibility and toughness, making it ideal for roofs terraces and walkways of all sizes including situations requiring regular foot traffic. Where new insulation is required, the Protec Evolve Warm Roof System can be specified as a flat or tapered scheme to provide a highly efficient solution to meet the very highest thermal performance requirements. Protec Evolve is supported by Polyroof’s Approved System Guarantees for up to 25 years.
Features and benefits:
- Low odour advanced formulation suitable for sensitive applications.
- Flexible and tough membrane - A flexible hybrid polymer waterproofing system with flexibility and robustness.
- RapidCure Technology - Fast application with cure times as low as 30 minutes.
- Seamless waterproof membrane - applied as a liquid, Protec Evolve forms a seamless waterproof membrane with no joints, no welds and no weak points.
- Cold-applied installation with zero risks from hot works: Unlike many traditional roofing materials that require open flame hot works to install, Protec Evolve is fully cold-applied meaning there are no risks of accidental fire during installation.
- Fire performance - Classified as BROOF(t4), the top rating achievable for a flat roof system and designating Protec Evolve as unrestricted under the national requirements.
- Protec Evolve is BBA approved (Certificate no. 09/4676) with a certified lifespan of at least 30 years.
- Suitable for use with zero falls in accordance with BBA certificate 09/4676.
- Manufactured in accordance with BS EN ISO 9001:2015 and BS EN 14001:2015.
- Protec Evolve waterproofing membrane has a third party verified, product specific EPD to EN 15804:2012+A2:2019.
Please consult manufacturer for further specification advice.
General information
Color | Grey Cirrus Light Grey/ Nimbus Dark Grey. |
Finish | Smooth Seamless, watertight finish. |
Material | Polymer Flexible hybrid polymer. Polyisocyanurate (PIR) Expanded polystyrene (EPS) Stonewool |
LengthPlease refer to project specific drawings. Formed on site. | Bespoke |
WidthPlease refer to project specific drawings. Formed on site. | Bespoke |
HeightVariable - dependent upon thermal performance requirement. | Bespoke |
Warranty description | 20 year 20 years (labour & materials) - 25 year extended guarantee available subject to manufacturers approval. |
Uniclass | |
CAWS | J31/120 Warm deck roof coating J31/10 Warm deck roof coating |
Specification data - Liquid-applied warm roof covering systems
Preparation | - |
Horizontal workPlease consult Polyroof for guidance and insert requirements. | - |
Skirtings and vertical workPlease consult Polyroof for guidance and insert requirements. | - |
Air and vapour control layer | Polyroof SA Vapour Control Layer.Primed with Polyroof SA Primer. |
Insulation | - |
Type | Polyroof Tissue Therm Insulation.Thickness dependent upon U-value requirement. |
Fixing | Adhesively bonded or mechanically fixed.Dependent upon Wind Loading Calculation Data (BS EN 1991 – 1-4:2005 (Eurocode 1)). |
Overlay | - |
Type | Not required for this system. |
Carrier membrane | - |
Type | Polyroof SA Carrier Layer.Primed with Polyroof SA Primer. |
Liquid-applied waterproofing | - |
Type | Cold liquid-applied Protec Evolve resin with catalyst (two coats). |
Reinforcement | Polymat 450 (first coat). |
Surface treatment | None.Paving (with pedestals).Decking (with pedestals).Polyroof Anti-slip (Mineral Slate) – Maintenance Traffic.Following client's request, third coat of Cold Liquid Applied Protec Evolve Resin. Broadcast in Mineral Slate. For further guidance consult manufacturer. |
System accessories | Polyroof pre-formed GRP trims - drip/ upstand.Polyroof pre-formed GRP trims - fillet.Polyroof pre-formed GRP trims - termination bar.Polyroof pre-formed GRP trims - simulated metal finish - standing seam.Polyroof pre-formed GRP trims - simulated metal finish - lead roll.Polyroof pre-formed internal outlets.Polyroof pre-formed through wall outlets.Polyroof insulation adhesive.Polyroof fall arrest systems.Consult manufacturer for options and insert requirements. Polyroof SA lightning conductor clips.Polyroof fixing plates for PV cells.Polyroof fixing plates for balustrade systems.Polyroof PR rooflights.To be specified separately. Fixings - EJOT TKR, associated stress plates and plastic tube washers.Fixings - EJOT TKE, associated stress plates and plastic tube washers.Fixings - EJOT FBS, associated stress plates and plastic tube washers.Fixings - EJOT FPS, associated stress plates and plastic tube washers.None. |
Colour | Cirrus Light Grey. Nimbus Dark Grey. |
Fire performance | Achieves Broof T4 classification in accordance with BBA certificate 09/4676. |
Cure time | 30–60 minutes. Cured state: tough, seamless and impermeable. |
Application temperature | 2–30°C. |
Substrate | Concrete. Timber. Structural metal roof deck. |
Fall | Flat. Pitched. Flat and pitched. |
Third-party certification | BBA certificate number 09/4676. |
Slip resistance | Tested to BS 7976-2: 2002. |
Resistance to water penetration | Suitable for use with zero falls in accordance with BBA certificate 09/4676. |
Waterproofing | Protec Evolve cold liquid-applied membrane. |
Installation | Installation by Polyroof-approved contractors. |
Sustainability data
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
EPD
Third party certifications
BBA Agrément Certificate
Protec Evolve System BBA Certificate
ISO 14001 Environmental Management Systems
Polyroof ISO 14001 Certificate
ISO 9001 Quality Management
Polyroof ISO 9001 Certificate
EPD
BREG EN EPD 000517
Literature
Modular Construction Solutions
Polyroof Seamless Waterproofing Solutions
Similar products from Polyroof Products Ltd
Protec Warm Roof Systems - Cold-applied liquid membrane